Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Blend Motors Not Working - Now Resolved |
|
|
Boxa Member Since: 01 Apr 2024 Location: Coventry Posts: 97 |
first thing to do is check the flap connector plug this is located just above the pollen filter in drivers footwell if I remember correctly its green, these often get knocked out or moved when people replace the pollen filter |
||
29th Jul 2024 3:31 am |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hello,
|
||
31st Jul 2024 5:15 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3183 |
I still believe that all those motors would not fail at once. (and Heater!!)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||||
31st Jul 2024 6:56 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hello,
|
||
31st Jul 2024 8:33 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hello well another few hours trying to sort this out and all I can say is
|
||
2nd Aug 2024 4:15 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3183 |
I think that you have found where to look for your problem.
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||||
2nd Aug 2024 4:56 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hmmm my simple plan was to put a link across the open terminals and so send 12volts to the battery side of fuse 39. My assumption is that if I overload the circuit then fuse 39 will blow.
|
||
2nd Aug 2024 5:57 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3183 |
I am being very careful as the various circuits and supplies are not straight forward and are part of the Climate Control System. The Climate Control explanation starts at page 1628 of the Repair Manual.
|
||
2nd Aug 2024 7:10 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Afternoon all,
|
||
4th Aug 2024 4:25 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3183 |
The power needed for signal seems to come from the 'Comfort Relay' in the Central Electronics Module via the CJB pin 48.
|
||
4th Aug 2024 6:55 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hi,
|
||
4th Aug 2024 8:29 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3183 |
I think that we have to wait to see if Nodge had the answer. He is your best bet, perhaps you could try to PM him, but he normally answers queries on the forum.
|
||
5th Aug 2024 8:08 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Sorry, I've not been keeping up with threads, as I've got my own issues with my Freelander engine.
|
||
6th Aug 2024 12:02 pm |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 |
Hello all,
|
||
7th Aug 2024 8:47 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis