![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > Blend Motors Not Working - Now Resolved |
![]() ![]() |
|
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2026 ![]() ![]() ![]() |
The PTC heater code is pretty normal, as they failed quite often, even mine has failed.
|
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
If memory serves it's possible using the AP 200 live data to look at the blend motors action, or you can hear them opening and closing by selecting the modes, easier with engine off. Also I am sure you can reset them using the AP200, but happy to stand corrected.
|
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
Thanks for the feedback, sadly I have to ask what is the AP200? I have an IID tool I use on my D3, I have tried using that but can't see much data just trigger levels for the motors which seems to be zero? |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
I wish I could remember if the IID shows live data for the motors, I think it does, |
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
I'll have a look tomorrow |
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
Hello all,
|
||
![]() |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3048 ![]() ![]() ![]() |
What was the condition of earth point G3D134? These earth points in the front driver/passenger compartment have been known to get damaged and/or corroded.
|
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
Hi I hadn't check it as wasn't sure where it was. Many thanks for the diagram that help loads. I'll have a look tomorrow.
|
||
![]() |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3048 ![]() ![]() ![]() |
Earth Point G3D134 seems to provide earthing for more than the Heater.
|
||||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
I would go for an exact match with Air Con Heater Control Unit, or are you on about changing the complete matrix |
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
I was going to use it as spares to try and replace items on mine, starting with the electric heater unit.
|
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
I have the automatic duel zone system as far as I can tell as it have the Sunload sensor on the dash.
|
||
![]() |
|
RPA Member Since: 25 Jul 2024 Location: Dorset Posts: 30 ![]() ![]() ![]() |
Ok more squinting at wiring diagrams and all the motors go into connect C23AE so if that has a problem it would explain the motors not working and the electric heater is an un related issue?
|
||
![]() |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3048 ![]() ![]() ![]() |
I am not sure that information on where all the looms and connectors are exists.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)