Hi all have just joined,have been reading posts for a while and found site very helpful now hoping you can help me please,since fitting new battery to my 2008 FL2 the function of holding the lock button on fob to lock car and close all windows has gone awry,now for some reason all windows apart from the drivers one shut,I have to remember to close it before turning ign' off or as it did last night stayed open cos I forgot ,wet bum time today.thanks Alex

Have you reset the windows since removing the battery, i know this should only effect the one touch open and close function but its a landrover so anything is possible

Hi Ricky,no have not tried window reset,do you know procedure please,Alex

Open the window fully then release the button wait a second and press the button down again and hold down for a few seconds and you will hear a faint click, then fully close the window release the button for a second then hold it up for a few seconds again you should hear a click. you will know if its worked as the one touch function will work.
Repeat for each window.

thanks,but that has tripped my memory,1 touch function still works,used it tonight, just this bloody 'close all windows if you hold lock button after doors have locked and mirrors retracted' function, beginning to think I will diss' battery again and see if it resets,Alex

Ah ,just out of sheer cussedness just been out and tried reset procedure and lo and behold fob window function back ????? even though I still had 1 touch function,I will never make out LR ! perhaps its the vindaloo in the design now

isn't this a case of press and hold the unlock and the lock button on the fob simultaneously or is my memory failing?

to reset or use ? up till now if I got out of car and left windows open (say on a hot day while parked in my drive ) I could lock car and shut windows all round by just holding down 'lock' button on fob,alex

to reset, iirc that's how I did it

Glad it worked Alex

Pressing and holding lock and unlock button simultaneously changes unlocking from two stage unlocking to easy entry.

two stage unlocking - first unlock opens drivers door, second opens remaining doors
easy entry - first unlock unlocks all doors.

Window reset requires procedure as posted of opening and closing the windows.