Freel2.com - View topic - Throtle body replacement


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > Throtle body replacement

Page 1 of 1

Print this entire topic ·

Suckfish

Member Since: 28 Feb 2018
Location: Southampton
Posts: 215

2007 Freelander 2 TD4 GS Manual Stornoway Grey

Throtle body replacement

Folks - having the throttle body replaced today - does the car need to be told that a new part has been fitted? via the ODBC port?

19th Jul 2024 9:55 am

BossBob

Member Since: 30 Sep 2010
Location: Bristol
Posts: 1401

2007 Freelander 2 TD4 GS Manual Baltic Blue

Probably needs an air path calibration!

19th Jul 2024 11:13 am

Suckfish

Member Since: 28 Feb 2018
Location: Southampton
Posts: 215

Thanks - can that be done manually? battery reset?

19th Jul 2024 12:05 pm

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1545

2011 Freelander 2 SD4 HSE Auto Indus Silver

Can be done with an AP200

19th Jul 2024 7:46 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5058

2014 Freelander 2 SD4 SE Auto Firenze Red

Suckfish wrote:
Thanks - can that be done manually? battery reset?

AFAIK air path calibration needs and specific hardware/software. I paid £30 for a friend of a friend to do it. Jules

19th Jul 2024 9:02 pm

Boxa

Member Since: 01 Apr 2024
Location: Coventry
Posts: 97

2013 Freelander 2 TD4 Dynamic Auto Santorini Black

many people have changed the throttle body and not had a calibration and everything was fine yes a calibration would be a good idea but my personal opinion is that the Ecu reads the parameters and recalibrates to the new throttle body settings I have changed a couple now and after a bit of wiring and clicking from the new TB on initial ignition on everything seemed to be ok. Before members start giving me stick "Remember this is only my opinion"

19th Jul 2024 10:30 pm

Arctic

Member Since: 24 Aug 2016
Location: Westmidlands
Posts: 561

2014 Freelander 2 SD4 HSE Auto Orkney Grey

Re: Throtle body replacement

Quote:
Suckfish wrote:
Folks - having the throttle body replaced today - does the car need to be told that a new part has been fitted? via the ODBC port?

Hi Suckfish.
How did the throttle body replacement go? did it need re-calibration, why was it being changed had the internal cogs worn if so there is a kit to repair.

24th Jul 2024 9:44 am

Richijones

Member Since: 27 Apr 2022
Location: Huddersfield
Posts: 19

2009 Freelander 2 TD4_e XS Manual Barolo Black

My throttle body stuck shut so engine would not rev past tick over.
Replaced it with one from Euro Car Parts, did not have any calibration done. This was 12 months ago and had no issues.

25th Sep 2024 12:11 pm

gasman

Member Since: 02 May 2013
Location: Tyneside
Posts: 903

2009 Freelander 2 TD4_e GS Manual Zermatt Silver

Would agree, just fit and forget. Now at the point when I learn something new something old is lost out the other side !
Now retired so it doesn't matter anymore.
Freelander now gone.

25th Sep 2024 5:01 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5058

Thats good to know.

When I replaced my EGR valve and air path calibration was definitely required as the engine went into limp mode every time until the calibration was done. Jules

26th Sep 2024 8:26 am

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum