![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Throtle body replacement |
![]() ![]() |
|
|
Suckfish Member Since: 28 Feb 2018 Location: Southampton Posts: 211 ![]() ![]() ![]() |
Folks - having the throttle body replaced today - does the car need to be told that a new part has been fitted? via the ODBC port? |
||
![]() |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1330 ![]() ![]() ![]() |
Probably needs an air path calibration! |
||
![]() |
|
Suckfish Member Since: 28 Feb 2018 Location: Southampton Posts: 211 ![]() ![]() ![]() |
Thanks - can that be done manually? battery reset? |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
Can be done with an AP200 |
||
![]() |
|
Boxa Member Since: 01 Apr 2024 Location: Coventry Posts: 92 ![]() ![]() ![]() |
many people have changed the throttle body and not had a calibration and everything was fine yes a calibration would be a good idea but my personal opinion is that the Ecu reads the parameters and recalibrates to the new throttle body settings I have changed a couple now and after a bit of wiring and clicking from the new TB on initial ignition on everything seemed to be ok. Before members start giving me stick "Remember this is only my opinion" |
||
![]() |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 501 ![]() ![]() ![]() |
Hi Suckfish. How did the throttle body replacement go? did it need re-calibration, why was it being changed had the internal cogs worn if so there is a kit to repair. |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)