Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > AUTOMATIC GEARBOX ISSUES - JOLT WHEN MOVING INTO "D&quo
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
mihaiN247



Member Since: 19 Jan 2022
Location: RO
Posts: 25

2014 Freelander 2 TD4 XS Auto Santorini Black
AUTOMATIC GEARBOX ISSUES - JOLT WHEN MOVING INTO "D&quo

Hi guys,

For a while now, I've been plagued with the following 2 symptoms mostly. Other than these 2, the cars runs absolutely amazing !

1. Sometimes, mostly after the car has heated up, when I move the shift into "D" the car has a slight jolting/cluck, sometimes a light one, sometimes a heavy one, more energetic.

2. Always, when I stop at traffic lights, the break pedal starts juddering. If I put the stick into "N", then the juddering stops.

Usually it goes like this:

1. I boot the car, go into D and all is nice & good.
2. After a couple of minutes, I reach a traffic light & I stop, the break pad starts juddering & I switch into "N" to stop it.
3. Traffic light becomes Green & I move into "D" to go, then the jolt/clunck happens.
4. Car runs runs just fine, it shifts buttery smooth & accelerates great, until the loop begins again.

I've changed the gearbox oil 2 times already, no improvements. Some suspect it might be the torque convertor.

What do you guys think?

Thanks !

Post #424952 5th Sep 2022 10:15 am
View user's profile Send private message View poster's gallery Reply with quote
Mikey



Member Since: 07 Jun 2008
Location: Dundee
Posts: 785

Scotland 2012 Freelander 2 SD4 HSE Auto Baltic Blue

Software update for the gearbox required

Post #424995 6th Sep 2022 11:30 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
mihaiN247



Member Since: 19 Jan 2022
Location: RO
Posts: 25

2014 Freelander 2 TD4 XS Auto Santorini Black

I took the car to the garage, made the software update, delete previous settings and presto !

No more symptoms, I'm just shocked ! Thanks!

Post #425124 10th Sep 2022 10:39 pm
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

Fingers crossed for the symptoms to not appear again anytime soon.

Told you in February that's also a hardware problem, which the software update only had masked.

Post #425126 10th Sep 2022 11:02 pm
View user's profile Send private message View poster's gallery Reply with quote
mihaiN247



Member Since: 19 Jan 2022
Location: RO
Posts: 25

2014 Freelander 2 TD4 XS Auto Santorini Black

Still on the lookout ,will keep an eye on it

Post #425128 11th Sep 2022 7:34 am
View user's profile Send private message View poster's gallery Reply with quote
mihaiN247



Member Since: 19 Jan 2022
Location: RO
Posts: 25

2014 Freelander 2 TD4 XS Auto Santorini Black

alex_pescaru wrote:
Fingers crossed for the symptoms to not appear again anytime soon.

Told you in February that's also a hardware problem, which the software update only had masked.


Btw, do you have any recommendations for a torque converter refurbishing in RO in case things begin to go south again?/

Post #425142 12th Sep 2022 7:45 am
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

The problem is not the TC, are some o-rings inside the box.
Read the message and the link posted in Feb.

But to answer to your exact question, no, I don't... Sorry.

Post #425152 12th Sep 2022 5:11 pm
View user's profile Send private message View poster's gallery Reply with quote
mihaiN247



Member Since: 19 Jan 2022
Location: RO
Posts: 25

2014 Freelander 2 TD4 XS Auto Santorini Black

Unfortunately the issue is back, made a software update & changed OIL to gearbox. What could it be???

Other than that, the car is just amazing !

Post #444195 19th Aug 2024 5:33 pm
View user's profile Send private message View poster's gallery Reply with quote
OLOSTEVE



Member Since: 18 Dec 2016
Location: Swanton Abbott, Norfolk NR10 5DU
Posts: 334

United Kingdom 2014 Freelander 2 TD4 XS Auto Firenze Red

Did you get the software update from a, JLR main dealer?
I had the same problem with my 2013 TD4 Auto and main dealer software update sorted it.

Post #444216 20th Aug 2024 7:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Swanny



Member Since: 24 Sep 2020
Location: Neo Chorio
Posts: 58

Cyprus 2013 Freelander 2 SD4 HSE Lux Auto Santorini Black

alex_pescaru wrote:
Fingers crossed for the symptoms to not appear again anytime soon.

Told you in February that's also a hardware problem, which the software update only had masked.


Hi Alex,

I too have this problem even after the software update though I doubt very much they did the driving adaptation after the update.....would that make a difference long term if they didn't do this you think?

So either way, if the problem persists we are left with only two options....have the gearbox removed and seals replaced or live with it? I wonder after reading your February link to the Seal Replacement report if a change of oil with lower viscosity would help? I know nothing of these things so please forgive my ignorance if I have suggested something stupid.

To avoid it I now always select Neutral or Park if I stop in traffic. Even in slow moving traffic if I have to stop completely I select Neutral. In this way I rarely if ever get the dreaded gearbox thump!

Thanks for all of your valuable input!

Post #444882 24th Sep 2024 2:57 pm
View user's profile Send private message View poster's gallery Reply with quote
OLOSTEVE



Member Since: 18 Dec 2016
Location: Swanton Abbott, Norfolk NR10 5DU
Posts: 334

United Kingdom 2014 Freelander 2 TD4 XS Auto Firenze Red

Very rarely do I experience this problem, if I do, only when stuck in traffic, M25, select 2nd gear and no problem. Obviously I am Auto gearbox.

Post #444887 24th Sep 2024 6:25 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site