it  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

And there's why I love this forum  FL2 TD4 GS 60 reg Facelift - so many issues
2019 DS. Terribly unreliable.
Sold DS for a 2021 Mitsubishi Outlander PHEV. Fingers crossed....
Sold Outlander for a 2014 SD4 SE Tech because I’m mental
Now greatly regret selling the Outlander. MPG of the FL2 is atrocious and so are the fuel bills. Fun though 😎
Couldn’t afford the fuel bills so back to an older Mitsubishi Outlander PHEV. Significantly better than I remembered it to be…

Hi, for the rear 12V power outlet if its no working first check the fuse which is located in boot ( 15 FA6 ) if its still not working change the power outlet its very cheap available on ebay, amazon 3-5 pound and very easy to install plug n play. and if you are using only for charging mobile choose the usb socket instead of power outlet and usb plug .

Great info on this thread. Boot not working, and only one of the two front ones.

Failing that i have 3 months warranty.

I have the same problem. Both fuses seem to be OK, yet there is no power to either the cigarette lighter socket in the boot or the rear of the 2 between the seats

Check for corrosion on the relevant fuse, or replace it if not done already, as sometimes a fuse looks ok but isn't. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

When my boot socket stopped working I somehow confused myself and missed changing the correct fuse.

However I discovered this thread which helped me understand how the fusebox worked (and how fragile it could be)

https://www.freel2.com/forum/topic34833.html?highlight=boot+12v

Mine was only a fuse, so my advice would be double check that you have the right fuse, FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Checked the fuses in the boot and when I removed and replaced FA6, the socket started working again!!!

The bad news is that I tried that with FB10 for the boot socket and still no power getting to the socket. 12V at the fuse, so maybe a faulty socket?