Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > FREELANDER 2 REAR HEADREST SCREEN ENTERTAINMENT SYSTEM |
|
|
darrellr Member Since: 15 Mar 2009 Location: Monmouth Posts: 140 |
Didn't see the guide - will look now to see if I missed anything. It took me 4.5 hours from start to finish - the main problem being the time taken to get the centre console over the handbrake. The downside is I now need a replacement handbrake 'gator' (??) as I've this one. I managed to pull the cables through as well - not easy but possible if you really stretch. New: Freelander2 GS 62 plate (MY13) - Santorini Black with Clearview & Front PDC Old: Freelander2 XS 09 Plate - Zermatt Silver with ST3 remap (eco map), Garmin 1490T Sat Nav, Rear Seat Entertainment kit |
||
9th Jun 2009 2:19 pm |
|
darrellr Member Since: 15 Mar 2009 Location: Monmouth Posts: 140 |
Arrived 9:30am today New: Freelander2 GS 62 plate (MY13) - Santorini Black with Clearview & Front PDC Old: Freelander2 XS 09 Plate - Zermatt Silver with ST3 remap (eco map), Garmin 1490T Sat Nav, Rear Seat Entertainment kit |
||
9th Jun 2009 4:08 pm |
|
another one Member Since: 01 Sep 2007 Location: Tayside Posts: 83 |
Does anyone know how to remove the Automatic gear lever to enable the centre console to be removed.
|
||
9th Jun 2009 6:41 pm |
|
taserboc Member Since: 09 Aug 2009 Location: washington Posts: 2 |
The gear lever stays one, but you have to reach up under neath and pop out the four corner of the base of teh lever from the trim ring. Once the four corners are out then then simple unplug the wire going into the traction control switch adj that shift lever and it lifts around it.
|
||
9th Aug 2009 2:17 pm |
|
Geordie Boy Member Since: 07 Jul 2009 Location: Northumberland Posts: 108 |
A big thank you to Chris 8 of 9 for the install guide, it made a big difference, only real problem I had was my landy is an auto, and could not work out how to remove gear selector, and did not want to force it, so removed the centre gaitor from surround to remove console. As Chris pointed out, LR do not say you have to disconect the hand brake cable, but this was more prefferable to dismantling the front dash area. I found though that I needed 7mm and 8mm sockets.
|
||
28th Aug 2009 10:53 pm |
|
J T Member Since: 21 Mar 2006 Location: Don't tell em Pike Posts: 207 |
I also used Chris's guide yesterday, only difference was 7&8 mill sockets.
|
||
29th Aug 2009 7:13 am |
|
phil_wkl Member Since: 01 Mar 2008 Location: Sydney, NSW Posts: 369 |
The rear screens can accept PAL or NTSC input, so I would suggest the problem lies in your DVD player. Your DVD disk is likely NTSC and the player is outputting it as PAL, or vice versa. Phil |
||
29th Aug 2009 9:58 am |
|
Geordie Boy Member Since: 07 Jul 2009 Location: Northumberland Posts: 108 |
Thanks for replies, but how do I fix it? anyone seen Jimmy Saville around anywhere ??? |
||
29th Aug 2009 6:46 pm |
|
phil_wkl Member Since: 01 Mar 2008 Location: Sydney, NSW Posts: 369 |
Check your DVD player, does it auto detect the colour system? do you manually need to switch it? is your disk region 1 and your DVD player a UK based one? Phil |
||
29th Aug 2009 10:32 pm |
|
Geordie Boy Member Since: 07 Jul 2009 Location: Northumberland Posts: 108 |
Hi Phil,
|
||
31st Aug 2009 7:44 pm |
|
phil_wkl Member Since: 01 Mar 2008 Location: Sydney, NSW Posts: 369 |
Sounds like you need to isolate the problem. Try a new source or connect your dvd player to your tv and see if the same issue remains.
|
||
1st Sep 2009 11:08 am |
|
waisal Member Since: 20 Feb 2008 Location: Lancashire Posts: 18 |
Hi
|
||
27th Oct 2009 8:30 pm |
|
10forcash Member Since: 31 Jan 2007 Location: Ubique Posts: 109 |
I've fitted quite a few of these to FL2 and D3's - BTW, Yeovil LR are selling them at £180, except the black cloth which are £230 - no reason other than LR have historically sold some of these so therefore have greater value and therefore greater cost to dealers
|
||
27th Oct 2009 8:50 pm |
|
waisal Member Since: 20 Feb 2008 Location: Lancashire Posts: 18 |
Hi
|
||
28th Oct 2009 7:20 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis