I think you're bang on the money there. Same connector, and would certainly explain why JLR no longer stock the earlier FL2 version if this is compatible. I'll nip up my mate's garage in a bit, see if I can take a quick look at one from a later RRS/RREv Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

Also LR014015 - 2010-2014 Disco4/RRS start button. Same connector again. Shallower than the later RREv/RRS one and slightly wider surround (38mm vs 36mm)

Facelift RREv / 2015 on RRS


LR014015 - D4 / RRS1 facelift
 Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

Bloody excellent work, could be worth a punt, if not i will try and locate a second hand one and remove the old switch and have a looksie inside

Haven't had the chance to get away from my desk and nip up the garage today, so have pinged my mate a message to see if he knows the answer without me attacking one of his cars with the trim removal tools. Certainly the plug/internal function seems identical, just a cosmetic/trim difference between the different switches. Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

you could be onto a winner here, as the other buttons are no longer available, thank you very much for your time and help

NoDo$h wrote:

Haven't had the chance to get away from my desk and nip up the garage today, so have pinged my mate a message to see if he knows the answer without me attacking one of his cars with the trim removal tools. Certainly the plug/internal function seems identical, just a cosmetic/trim difference between the different switches.

Most probably the spelling is wrong on the chinese copies

Strat Pots Enjin? Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

One has just turned up on eBay.

Brand new

LR039740

39.99 or best offer...

I have no connection to the seller.

Thanks Neil i did see it but it is the incorrect switch, the one i need is LR023490

Quote:

Welshy wrote:

Well the search continues, this email came this morning from Rimmer Bros

"I am sorry this part did not arrive and on inspection with Land Rover they have no expected delivery date at present"

Hi did you have any joy, i took the chance and ordered this below it seems to be the same plug and four prongs front is different it does not stand proud but would be flush if fitted, i have stuck it in my stock pile just in case.

It is the one i first linked to way up the thread.
https://www.ebay.co.uk/itm/125552252285

1

2

3

4

Just so everyone is sure i have not fitted this but am in hope it would fit the hole of the old button.

I would be tempted to try it can’t be a hard job to swap the plug and give it a go.

Powerful uk have a video quite easy.
Good luck. 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Quote:

SYFL2 wrote:

I would be tempted to try it can’t be a hard job to swap the plug and give it a go.

Rommel Powerful uk have a video quite easy.
Good luck.

Yes I agree, I just took some measurements and pretty sure it would fit even if you had to file the hole a bit bigger? 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.