![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Start button, is it a common Fault |
![]() ![]() |
|
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 492 ![]() ![]() ![]() |
I think you're bang on the money there. Same connector, and would certainly explain why JLR no longer stock the earlier FL2 version if this is compatible. I'll nip up my mate's garage in a bit, see if I can take a quick look at one from a later RRS/RREv Current driveway contents:
|
||
![]() |
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 492 ![]() ![]() ![]() |
Also LR014015 - 2010-2014 Disco4/RRS start button. Same connector again. Shallower than the later RREv/RRS one and slightly wider surround (38mm vs 36mm)
|
||
![]() |
|
Welshy Member Since: 25 Sep 2019 Location: freezing cold valleys Posts: 69 ![]() ![]() ![]() |
Bloody excellent work, could be worth a punt, if not i will try and locate a second hand one and remove the old switch and have a looksie inside |
||
![]() |
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 492 ![]() ![]() ![]() |
Haven't had the chance to get away from my desk and nip up the garage today, so have pinged my mate a message to see if he knows the answer without me attacking one of his cars with the trim removal tools. Certainly the plug/internal function seems identical, just a cosmetic/trim difference between the different switches. Current driveway contents:
|
||
![]() |
|
Welshy Member Since: 25 Sep 2019 Location: freezing cold valleys Posts: 69 ![]() ![]() ![]() |
you could be onto a winner here, as the other buttons are no longer available, thank you very much for your time and help |
||
![]() |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 695 ![]() ![]() ![]() |
Thats what I thought, I would not be surprised if all these push buttons are the same internally just different trims fitted? Just wondering how good/bad the chinese copies are??? 2013 FL2 XS. Defender 90 300 TDi. Defender 90 300 TDi CSW. 1964 MGB Roadster. 1944 Willys MB "Jeep" with bullet holes. (gone) 17 hand Irish Drought Thoroughbred (mostly lame) Nagging Old Boiler. Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented. The Enemy is our own corrupt Government. |
||
![]() |
|
Welshy Member Since: 25 Sep 2019 Location: freezing cold valleys Posts: 69 ![]() ![]() ![]() |
Most probably the spelling is wrong on the chinese copies |
||
![]() |
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 492 ![]() ![]() ![]() |
Strat Pots Enjin? Current driveway contents:
|
||
![]() |
|
NeilTD4 Member Since: 21 May 2018 Location: Warwickshire Posts: 166 ![]() ![]() ![]() |
One has just turned up on eBay.
|
||
![]() |
|
Welshy Member Since: 25 Sep 2019 Location: freezing cold valleys Posts: 69 ![]() ![]() ![]() |
Thanks Neil i did see it but it is the incorrect switch, the one i need is LR023490 |
||
![]() |
|
Arctic Member Since: 24 Aug 2016 Location: Westmidlands Posts: 573 ![]() ![]() ![]() |
Hi did you have any joy, i took the chance and ordered this below it seems to be the same plug and four prongs front is different it does not stand proud but would be flush if fitted, i have stuck it in my stock pile just in case. It is the one i first linked to way up the thread. https://www.ebay.co.uk/itm/125552252285 ![]() ![]() ![]() ![]() Just so everyone is sure i have not fitted this but am in hope it would fit the hole of the old button. Last edited by Arctic on 17th Jan 2023 10:06 am. Edited 1 time in total |
||
![]() |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2608 ![]() ![]() |
I would be tempted to try it can’t be a hard job to swap the plug and give it a go. |
||
![]() |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 695 ![]() ![]() ![]() |
Powerful uk have a video quite easy.
|
||
![]() |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 695 ![]() ![]() ![]() |
Yes I agree, I just took some measurements and pretty sure it would fit even if you had to file the hole a bit bigger? 2013 FL2 XS.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)