Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Glow plug problem |
|
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
"Think I should just get a set of glow plugs."
|
||
12th Dec 2022 12:32 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Similar story here this morning, but no happy ending...as yet! Dash is reading -6C but that is with the full sun shining on the front of the car and at noon, so it must have been a bit lower overnight.
|
||
12th Dec 2022 12:42 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Fan heater seems to have done the trick! Dash now reading -3C and it managed to start! 2005 D3 2.7 Auto
|
||
12th Dec 2022 12:52 pm |
|
3landertwo Member Since: 27 May 2020 Location: UK Posts: 1127 |
Yep !, mine started for the first time in 4 days.
|
||
12th Dec 2022 2:48 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Been out and about all day. Outside temp got to the dizzy heights of minus 2.
|
||
12th Dec 2022 5:05 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3131 |
An interesting question above At what temperature does modern diesel become to thick to work (or flow?) I remember from years ago that trucks and buses used to stop working on very cold days, not heard of it recently. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011) FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||
12th Dec 2022 6:14 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Ian, diesel fuel in the UK legally has to be good down to minus 15C.
|
||
12th Dec 2022 6:28 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5010 |
I used to have a Kenlowe Hotstart pre-heater system in my Discovery 1 and 2 which worked well as they took ages to warm up.
|
||
12th Dec 2022 7:07 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Having got the FL2 started at lunch-time and needing to get back north from Glasgow, I didn't risk turning it off again until I got home. It will be interesting to see if it starts normally tomorrow morning. Dash was reading -8C most of the way up the A9, dipping to -10C at Dulnain Bridge and Tomatin. 2005 D3 2.7 Auto
|
||
12th Dec 2022 7:34 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Janderson41, I see that you are around the -8C figure again this morning! (Well, a weather station in Johnstone is showing -8C and one in Kilbirnie is also -8C, so I assume Howood is similar!). Hope it starts today!
|
||
13th Dec 2022 7:24 am |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 632 |
When I served in The RCT driving 1944 built Leyland Hippos we use to put 10% paraffin in with the diesel to keep the trucks going in sub-zero temperatures, you cannot do it in Civvie St as the two fuels are taxed at a different rate but during the "cold war" the Army did as they please. 2013 FL2 XS. Defender 90 300 TDi. Defender 90 300 TDi CSW. 1964 MGB Roadster. 1944 Willys MB "Jeep" with bullet holes. (gone) 17 hand Irish Drought Thoroughbred (mostly lame) Nagging Old Boiler. Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented |
||
13th Dec 2022 7:51 am |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Had a quick look to see if yesterday's starting debacle had left any error codes and there is nothing new amongst the usual list of minor gripes from the ECUs. But I wonder if anyone can explain what I am seeing here:
|
||
13th Dec 2022 12:41 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Hello Worms, interesting photos.
|
||
13th Dec 2022 3:26 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Jim, that's a screenshot from the live values part of the GAP Tool. On most of the other live values, I can make the values change by switching the functions on and off, but these two don't seem to change in response to firing up the engine. 2005 D3 2.7 Auto
|
||
13th Dec 2022 9:00 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis