Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > oil leak on 2.2 XS |
|
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
Could be Rear Crankshaft Seal. I would also check PCV pipe to PCV valve connection first. |
||
11th Oct 2022 6:14 am |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 438 |
Hi Maurice, could it possibly be from the power steering. The bottom set of pipes are notorious for rusting through. Mine,s failed completely. Couldn’t,t even see the crack. Jim A
|
||
11th Oct 2022 6:44 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Its not the haldex as that is situated in front of the rear wheels.
|
||
11th Oct 2022 7:54 am |
|
RealBeale Member Since: 13 Jun 2016 Location: Birmingham Great Barr Posts: 914 |
Looks like rusty water to me. What's the header tank looking like ? |
||
11th Oct 2022 10:03 am |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
Hi Jim, firstly thanks for directing me here, i dont think its power steering as the level hasnt dropped nor has coolant or engine oil.
|
||
11th Oct 2022 3:55 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
I thought they called the front differential the haldex too? |
||
11th Oct 2022 4:38 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Nope, the haldex is a very specific , electronic locking drive train device which feeds power from the prop shaft through to the rear differential to which it is attached.
|
||
11th Oct 2022 5:08 pm |
|
Volrider Member Since: 14 Aug 2018 Location: staffs Posts: 217 |
I had a similar problem it was oil seal to PTU from gearbox, PTU had to come off and drive shafts also so to save time all the oil seals were replaced, not a huge job (if you do your own work) but if its out might as well change the lot. 2014 Freelander 2 XS TD4
|
||
11th Oct 2022 11:27 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
Gotcha will do |
||
12th Oct 2022 10:25 am |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
Well i thought id have a look at how to replace the rear crank oil seal myself but nothing comes up, so i thought look at clutch replacement, as i lknow that would get me as far as the crank seal and found this Hmmmm too many nuts and bolts to be removed and put back as id forget where they all went. |
||
12th Oct 2022 10:40 am |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
Yes you can see the RCS in the movie problem is getting to it and putting everything back, especially without a lift. I would have done it at the roadside easily in my youth but not now. |
||
12th Oct 2022 11:30 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
https://www.dropbox.com/s/n0e6q5jj1l1fe2z/...6-2010.pdf Jules |
||
12th Oct 2022 1:23 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
downloaded and saved |
||
12th Oct 2022 6:06 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 |
Update on this issue, took it in to have two new tyres fitted by my local mechanic and for him to have alook to see if he ca pin point the leak.
|
||
20th Oct 2022 9:29 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis