Freel2.com - View topic - Engine Under tray pad


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Engine Under tray pad

Page 2 of 3

Print this entire topic ·

Bobupndown

Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2806

2014 Freelander 2 SD4 GS Auto Orkney Grey

Mine doesn't have that. Just a plain steel undertray. Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

8th Oct 2021 6:21 am

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 913

2007 Freelander 2 i6 HSE Auto Sumatra Black

Steve D wrote:
Go to a breakers and get the sound deadening pad from under any bonnet and cut that to shape.

One step ahead of you. I got a replacement under bonnet pad "Free" from Powerfuluk, as they were replacing their F2 bonnet and were just going to chuck it in the skip. I dug out my damaged pad (rats chewed a fair chunk out of it), but it's not the same material as on the under tray, However, if I cannot find the correct item, I may just end up using it.

8th Oct 2021 7:37 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

2014 Freelander 2 SD4 SE Auto Firenze Red

I think my 2014 SD4 has just the metal undertray.
Maybe have been deleted on late models.

Just took the undertray off . Yes - bare steel undertray, no padding Jules

Last edited by jules on 10th Oct 2021 8:21 pm. Edited 1 time in total

8th Oct 2021 11:32 pm

mcdiejdh

Member Since: 29 Apr 2018
Location: Manchester
Posts: 22

2013 Freelander 2 TD4 GS Manual Orkney Grey

Part number listed on my invoice was RLR028443 cost 87.68 plus vat

I have a 2013 registered model.

10th Oct 2021 2:37 pm

sadler32

Member Since: 30 Oct 2011
Location: Surrey
Posts: 75

2009 Freelander 2 TD4 HSE Auto Bali Blue

That’s the part number for what looks like an insulation blanket to cover the complete oil pan. The insulation blanket to go on the under tray is flat.

10th Oct 2021 3:17 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

Did JLR swap the undertray insulation for the oil pan insulation ? Jules

10th Oct 2021 8:22 pm

iain cooper

Member Since: 27 Aug 2007
Location: north of Glasgow
Posts: 1989

2009 Freelander 2 TD4_e HSE Manual Lago Grey

you can't purchase the undertray pad separately, it comes as part of the undertray.

mine got covered in oil and after enquiring at dealers, I just removed it as I did not want to buy a new undertray

and it does make a difference without the pad, it is noticeably noisier, but as I had decided to change the car I wasn't too bothered.

Iain

14th Oct 2021 9:29 am

PRadd

Member Since: 09 Apr 2020
Location: East Lancs
Posts: 362

2014 Freelander 2 TD4 Dynamic Manual Santorini Black

Sounds like the undertray pad may have been swapped for the moulded Sump blanket on later models - my 2014 definitely has a furry moulded blanket on the sump but (from memory) I think just a plain steel undertray with no pad - 2014 TD4 2014 Freelander 2 TD4 Manual Dynamic
1956/7 88" Series One Land Rover
1956/7 88" Series One Land Rover - undergoing restoration

14th Oct 2021 10:28 am

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

iain cooper wrote:
you can't purchase the undertray pad separately, it comes as part of the undertray.

mine got covered in oil and after enquiring at dealers, I just removed it as I did not want to buy a new undertray

and it does make a difference without the pad, it is noticeably noisier, but as I had decided to change the car I wasn't too bothered.

Iain

Did yours have the insulation around the oil pan as well as the pad on the undertray? Jules

14th Oct 2021 8:49 pm

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 913

Had enough of searching for the genuine article, so went for this off Ebay for only £10, with more than enough left over to use elsewhere on the vehicle.

Click image to enlarge

Don't know how good it is yet, because I've decided to refresh the paint around the edges where it's worn away. As soon as it's dry, I'll refit and report back.
But boy can you hear the road noise without the tray fitted !!

23rd Oct 2021 11:15 am

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 913

Just to add, I've decided to give the front subframe a spruce up too, while the tray is off. Rust inhibitor, paint, then maybe a waxoil .

23rd Oct 2021 3:02 pm

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 913

Well I spruced up the front subframe. Now the under tray is back on and all I can say is "what a difference!".
The noise from under the bonnet is drastically reduced, even whilst revving the engine up. Glad I did it now .

26th Oct 2021 11:46 am

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

@ RB

Good to know.
I wonder if having the oil pan wrap (as I do) and then adding some sound insulation to the plain undertray would have a combined effect on sound transmission.
For £10 maybe worth trying.
Have you a link to the sound deadening stuff ? Jules

26th Oct 2021 3:36 pm

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 913

@ Jules
https://www.ebay.co.uk/itm/353721902158

27th Oct 2021 2:09 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5021

ordered -thanks. Jules

27th Oct 2021 7:11 pm

Page 2 of 3

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum