Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > quoted fuel consumption figures |
|
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Manufacturers use a rolling road to measure fuel consumption, which obviously doesn't have hills or wind resistance.
|
||
30th Oct 2020 2:40 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5043 |
Its not just JLR -its all manufactures. These figures are based on standardised tests designed by the testing organisations not the manufacturer. Its not just about MPG its also about pollution (CO2 and NOx)
|
||
30th Oct 2020 2:57 pm |
|
GundogSD4 Member Since: 04 Dec 2019 Location: Wiltshire Posts: 478 |
The only way I could achieve the MPG LR say my FL2 should do would be to get out and push it
|
||
30th Oct 2020 4:31 pm |
|
tenet Member Since: 23 Jul 2009 Location: cotswolds Posts: 1081 |
This is an interesting site:
|
||
30th Oct 2020 4:44 pm |
|
GundogSD4 Member Since: 04 Dec 2019 Location: Wiltshire Posts: 478 |
As I said 30-32 real world MPG. |
||
30th Oct 2020 4:52 pm |
|
mcdiejdh Member Since: 29 Apr 2018 Location: Manchester Posts: 22 |
I drive gentle but get around 43-46 mpg according to the dashboard. Most of my driving is motorway based and cruise along at 60 ish. |
||
30th Oct 2020 5:23 pm |
|
dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4354 |
I believe that when a manufacturer measures engine HP and torque they do it on a bench with a dynamometer and with no alternator or aircon or gearbox or anything else that isn't necessary to make it go. 3 x FL1 2 manual + 1 auto
|
||
30th Oct 2020 5:24 pm |
|
Dartman the one Member Since: 04 Apr 2013 Location: Seville, Spain Posts: 1689 |
BHP is normally quoted at the flywheel, torque is somewhat different as it can increase due to gearing but hopefully it is at the flywheel then with an auto in low gear it is much higher at the wheels my PC is slightly to the right of Genghis
|
||
30th Oct 2020 6:09 pm |
|
Sidthecat Member Since: 10 Sep 2017 Location: Sarf-East London-sur-Mer Posts: 1635 |
Think I'll have to change my dashboard for one that you've got |
||
30th Oct 2020 6:10 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5043 |
Actually the FL2 kerb weight is only around 1800kg The 2500kg is its gross vehicle weight (ie the maximum it is allowed to weigh fully loaded) We get 34mpg pootling around our home area. Cruising through the miles of roadworks on the M6 at 50mph I got 42MPG. I find as soon as I go over 2000rpm the fuel consumption goes way up. Jules |
||
30th Oct 2020 7:11 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4907 |
I manage to get 7.8L/100km (36.2 mpg) with a petrol engine with a 500kg payload, the spare wheel, awning & other stuff in the roof, wind deflectors & mud flaps.
|
||||||
30th Oct 2020 8:03 pm |
|
devondave Member Since: 06 Dec 2010 Location: United Kingdom Posts: 224 |
Over the almost 10 years I have averaged about 39mpg. Quite happy with that |
||
31st Oct 2020 9:37 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5043 |
thats very good. Jules |
||
31st Oct 2020 9:49 am |
|
axle Member Since: 11 Sep 2016 Location: South Yorkshire. Posts: 1054 |
cruising along the motorway i get 28mpg, around town 18, if i floor it about 9. Common sense isn't very common.
|
||
31st Oct 2020 12:05 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis