![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > LED Bulbs..again |
![]() ![]() |
|
|
Deano64 Member Since: 16 Aug 2013 Location: Huddersfield Posts: 602 ![]() ![]() ![]() |
Thanks - might try them on next change - in about 2 years time, by my average bulb lifetime so far
|
||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
Really interested in these too! |
||
![]() |
|
Bluebird1999 Member Since: 05 Jan 2017 Location: Cumbria Posts: 99 ![]() ![]() ![]() |
Just ordered some, they only showed 2 left in stock.
|
||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
I also have the Land Rover mod. Watching with interest |
||
![]() |
|
Bluebird1999 Member Since: 05 Jan 2017 Location: Cumbria Posts: 99 ![]() ![]() ![]() |
They should be OK, specification states that the working voltage is 9-22 volts. 64 plate TD4 SE Santorini Black 2021 Mazda MX5 GT Sport Tech |
||
![]() |
|
Bluebird1999 Member Since: 05 Jan 2017 Location: Cumbria Posts: 99 ![]() ![]() ![]() |
I quoted the wrong one and answered my own statement. I’ve just checked the specification and it states that the working voltage is 9-22, so it shouldn’t be a problem. I’ll find out when they arrive ![]() 2021 Mazda MX5 GT Sport Tech |
||
![]() |
|
Mattmjones Member Since: 10 Jul 2019 Location: North Wales Posts: 153 ![]() ![]() ![]() |
A couple of people have asked for pics of the beam pattern on these LED projector-specific HB3s. Just had the chance to go outside, start the car and shine the headlights at the garage doors - sorry for the delay. Here are a couple of photos...
|
||
![]() |
|
Dom Member Since: 15 Jun 2016 Location: Hereford Posts: 129 ![]() ![]() ![]() |
Thanks for taking the time to take these photos. Beam pattern looks spot on. Definitely will be giving these a go. Freelander 2 XS 2013
|
||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
Fitted. Now waiting for dark. I noted the collars are adjustable, so you could adjust the orientation of the led chips. Has anyone had to do this or do you know the correct orientation? Thanks. |
||
![]() |
|
christopher Member Since: 01 Jul 2018 Location: Chester Posts: 46 ![]() ![]() ![]() |
I've also bought a pair and just fitted them after Sunday lunch.
|
||||||||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
Did you see the led chip orientation when fitted? Googling seems to reveal they should either be both pointing up, or both pointing down (ie 10 too & 10 past or 20 too & 20 past). I didn’t see what mine were when they went in unfortunately |
||
![]() |
|
christopher Member Since: 01 Jul 2018 Location: Chester Posts: 46 ![]() ![]() ![]() |
The first one I fitted, the drivers side, rotated freely. I fitted that one with the 2 LEDs facing upwards (with no idea if that was right or wrong).
|
||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
So mine were wonky! I’ve just been out and reset so the LED’s are pointing up equally. Seems like a nice even light spread. Has anyone tried them with LED’s orientated down? |
||
![]() |
|
Remedy Member Since: 25 Feb 2010 Location: Yorkshire Posts: 42 ![]() ![]() ![]() |
I’ve found the folllowing two sites, which seem to show the b2b manufacturer and showing orientation should be Upward
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)