![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > In Car Electronics > Surround Camera System Retrofit “COMPLETED” |
![]() ![]() |
|
|
Osynlig Member Since: 27 May 2017 Location: Moscow Posts: 9 ![]() |
Correct I understand, that L320 is Range Rover Sport L320? |
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Discovery 4 or Range Rover Sport MY13 or earlier have same mirror as Freelander 2👍 MY15
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Rear surround camera installed and operational
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Haven’t had time to do the camera fit to the door mirrors but I do have a wonderful view of my foot wells
|
||
![]() |
|
Brit plumber Member Since: 18 Jan 2019 Location: Lincolnshire Posts: 32 ![]() ![]() |
Hi Stuart, I’m visiting from the RRS forum and would like to ask if you can tell me the CCF file you changed to activate the surround stystem. I was told it couldn’t be done but you’ve got it sorted!! My GAP IID Tool can activate corner cameras but its obviously missing something. What diagnostic tool are you using as I’m thinking of trading in the GAP tool for something a little more useful.
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
I’m using SDD.
|
||
![]() |
|
Brit plumber Member Since: 18 Jan 2019 Location: Lincolnshire Posts: 32 ![]() ![]() |
Thanks for the reply, I’ve got parking aids already installed from factory and I’ve made sure it’s all activated in the CCF. I don’t have the module on the CAN BUS as yet as I was hoping to enable it first to make sure I could do it before buying all the cabling (Although I have managed to buy the green power connector and pins for £4 from RS components). I’ve located the power connection which is present from fuse box to body link harness so just need to get a pin for that. I’ve located the earth but I still need to find the BUS connections (I know where they are).
|
||
![]() |
|
Brit plumber Member Since: 18 Jan 2019 Location: Lincolnshire Posts: 32 ![]() ![]() |
|
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Ok, I’m flying blind here as you’re not giving me all the info.
|
||
![]() |
|
Sidthecat Member Since: 10 Sep 2017 Location: Sarf-East London-sur-Mer Posts: 1635 ![]() ![]() ![]() |
Stuart, you must be running out of things to automate |
||
![]() |
|
Vanny Member Since: 06 Dec 2015 Location: Cheshire Posts: 437 ![]() ![]() ![]() |
I'm awaiting Automatic Speed Limiting (ASL), Adaptive Cruise Control (ACC), blind spot monitoring and a few more, plenty for StuartC to be working on |
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Actually ASL is easy, already identified fields only problem is that L359 doesn't have a switch to turn it off/on. Adaptive cruise ditto except no on/off switch necessary and blind spot no problem either just need to find a mirror glass to fit L359 wing mirror with icon in it, L322 maybe?
|
||
![]() |
|
Vanny Member Since: 06 Dec 2015 Location: Cheshire Posts: 437 ![]() ![]() ![]() |
ACC needs at least a radar, if not vision cameras for later systems, probably not easy in the least. I assume ASL is in the gearbox ECU so might be trickier than it sounds. |
||
![]() |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 ![]() ![]() ![]() |
Lol, I’m sure your up for it |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)