Hi,

MY14 Freelander locks and unlocked perfectly. On double lock it has always sounded one "Bleep"

My Freelander has now started "bleeping" when I unlock her. Sometimes its Bleep, Bleep, other times it performs this twice.
The noise is also a different type of bleep compared to when I double lock. No error messages on the display.

Sorry about all the bleeping. Any Idea why its started doing this ?

Neil.

The usual cause of bleeping on the modern car when unlocking is low battery levels in the remote fobs. The freelander mk1 had this feature also. I would check and possibly replace the battery to see if it no longer bleeps as a battery only cost a few pounds.

I'm pretty sure it's telling you that one of your "doors, bonnet, tailgate" is ajar or failing to unlock! MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Hi,

All doors are locking and unlocking perfectly. The car is performing without fault.
Just cant work out why is bleeping when I unlock it as it never done this before.
It now does it all the time, bleep, bleep and then again bleep, bleep when I unlock her ?

Hi, I am suffering the same as you. Please see my thread.

http://www.freel2.com/forum/topic24395.html

Land Rover read the codes and I have a internal sensor error, this causes the car to beep twice when unlocking drivers door then beeps twice again when you unlock the other doors. You can fix it yourself by disconnecting the battery for a while but it will come back eventually.

I got this code, probably not spelt right as the land rover tech has awful handwriting.
Alarm fault B102B-S7 BCM - 14854 Passive key B112C-96 interior motion sensor

one way to test the internal sensor is to fully arm the car and sit still inside and wait till it fully arms and then move, if your motion sensor doesn't pick you up and sound the alarm, then disconnect it and reconnect it and try again Former Mod/Member, with the most post & Chicken George Arch nemesis

Many thanks for the reply's. I'll give it a go and let you know if its worked

I had a very similar incident recently, took to dealer who updated software and all was good again (under warranty)
It did reset the basic set-up options.
Hope this helps

I have this beeping too. Car is configured for 2 stages open. Press open once, it beeps twice, press open twice it beeps 4 times.

Haha, mine started doing this today a week before it's first service!
Rang Service manager and said no problem, simple software update, Aparently it's quite well
Known and software patch fixes it
Will find out next week! MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Did a hard reset. All sorted now and working as it should

Many thanks for your help

Neil.

Mine has been taking the Bleep into its hands for the last few months.

Just done a Hard Re-set and so far its now back to being a quiet and well behaved car as it should be.  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Hello

Mines doing this now

Did the bleeping come back later ?

ta

Not thinking about it so it must be behaving. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Stuartc wrote:

Haha, mine started doing this today a week before it's first service!
Rang Service manager and said no problem, simple software update, Aparently it's quite well
Known and software patch fixes it
Will find out next week!

your going to be gutted if the software update overwrites all your hard work