Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Losing power after warm up - especially on hot days |
|
|
philllip Member Since: 08 Dec 2014 Location: Noosa, Queensland Posts: 169 |
Tried cleaning your MAF? Solved my issues previously. There is a great Liquid Moly MAF cleaner. Don’t you use any other cleaner other than a MAF one. |
||
21st Aug 2018 10:14 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
The JLR workshop manual has a whole section on freeing up the turbo vane actuating rod and lubricating it. Easing oil or other lubricants wont last long once the turbo heats up. JLR recommend using a high temperature lubricant (LR 029042), which is very expensive. Im going to use Ceratec grease (good for 1000C). Jules |
||
21st Aug 2018 4:18 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
I must learn to read FL2 MY10 TD4 GS traded in at 2 years
|
||
21st Aug 2018 4:37 pm |
|
rogerlock Member Since: 29 Jun 2018 Location: Wotton under Edge. GL12 8RF Posts: 5 |
Thank you Jules. I will get some Ceratec Grease before I attempt the job at the weekend. |
||
21st Aug 2018 5:26 pm |
|
rogerlock Member Since: 29 Jun 2018 Location: Wotton under Edge. GL12 8RF Posts: 5 |
Hi Philllip. Yes I have tried cleaning the MAF but it made no difference, but thanks for the offer of help. |
||
21st Aug 2018 5:54 pm |
|
Dick E Member Since: 03 Jan 2016 Location: Horsham Posts: 75 |
Thanks for all of th ideas guys. Now have to be away this coming weekend.......wife needs a break she says....ok i say go on your own.....that went down well . So now it looks like i'll have to wait until the following weekend to try to sort it out. I'll post results here after i have tried all the suggestions. |
||
21st Aug 2018 7:15 pm |
|
JeandreDiedericks Member Since: 01 Jul 2018 Location: Pretoria Posts: 9 |
So I still have this problem with my Freelander. When hot it seems like it has no boost. Its fine on a cold day but on a hot day its really noticeable as it hangs onto gears. My only fault code is an o2 sensor fault. And even when unplugged the car still does it. Ive tried blanking the EGR removed the Cat freeing up the turbo actuator all to no avail. Getting tired of this now. Anyone else have any ideas? |
||
9th Sep 2018 8:30 am |
|
Dick E Member Since: 03 Jan 2016 Location: Horsham Posts: 75 |
Well, i finally got rond to doing just a couple of things. Only changed the fuel filter and the cam sensor. Couldn't change the crankshaft sensor because they sent me the wrong one.
|
||
10th Sep 2018 7:14 am |
|
JeandreDiedericks Member Since: 01 Jul 2018 Location: Pretoria Posts: 9 |
So I've been driving the Freelander hooked up to a Diagnostic machine for a few days now and one thing is evident, I'm loosing boost. When cold the car will be boosting around 1.2-1.4 bar (read from MAP sensor) and have all the power it should, after driving for a while it's like a switch has been flicked, usually when standing at a traffic light, pull of there and it only boosts somewhere between 0.6-0.8 bar. Found that the intercooler is leaking but can't think that it causes it to loose that much boost? Can it be? Cant find leaks in any pipes? Or could it be the turbo causing this erratic boost problems. Air intake temps at the MAP sensor is usually between 65-75 degrees celsuis.
|
||
16th Sep 2018 6:52 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis