Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > In Car Electronics > Surround Camera System Retrofit “COMPLETED” |
|
|
Vanny Member Since: 06 Dec 2015 Location: Cheshire Posts: 437 |
Have you made any consideration to how much heat is pumped out by the rear floor level vents that are underneath all that complicated electronics? I guess in your climate you don't blow heat in to the car from the HVAC very often, but as they can get rather hot I think I would be tempted to put an insulating layer on the bottom of the bracket. |
||
7th May 2018 9:17 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
we tend to worry more about cooling than heating here in Australia🔥
|
||
7th May 2018 10:12 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
12th May 2018 3:26 pm |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3880 |
Stuart I have to say you a genius mate (although clearly with too much time on his hands )
|
||
14th May 2018 7:05 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Lol, Thanks Rog.....More determination than smarts and I enjoy the challenge.
|
||
14th May 2018 10:44 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
27th May 2018 2:05 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Activated the Surround Camera System in the CCF and set up as a “short cut soft key” in the home menu along with the “Extra Features” option.
|
||
24th Jun 2018 6:01 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
After some more research I’ve now concluded that the rear Camera I have CPLA-19h422-AB LR052028 won’t work on the Bj32-14f026- IPMB, incompatible software and BJ32-19h422-AB LR025912 is the Camera(s) I need. The camera I have is for MY14 onwards l538, l319. Not a problem but this style of camera with the six pin rear has a more compact socket/harness. The same applies for the wing mirror camera’s which predate even the LR025912 Camera belonging to L320 MY10 and L319. Again no biggie as the newer camera will fit in quite nicely and my main objective with the wing mirrors is that they’re a straight swap with the current mirror, the actual camera working would have been a bonus.
|
||
28th Jun 2018 8:00 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Time to start running some wiring starting with the main power for The IPMB from the RJB.
|
||
7th Jul 2018 6:48 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Productive weekend as well as “tow assist” I now have a camera and strangely enough 1 picture
|
||
22nd Jul 2018 8:22 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Rear Surround Camera mount done using the standard fixed camera plinth!
|
||
7th Aug 2018 11:31 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
11th Aug 2018 8:50 am |
|
Mowog Member Since: 11 Apr 2018 Location: Cheshire Posts: 503 |
Excellent work.
|
||
11th Aug 2018 9:03 am |
|
Osynlig Member Since: 27 May 2017 Location: Moscow Posts: 9 |
Hello, Stuartc
|
||
22nd Aug 2018 7:16 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis