Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Cross Bar Placement
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
X_DrN



Member Since: 24 Aug 2015
Location: Durham
Posts: 8

United Kingdom 2013 Freelander 2 TD4 GS Manual Orkney Grey
Cross Bar Placement

Hi,

To anyone who uses the genuine cross bars for the roof rails - do you position the rear bar infront of, or behind the fixed cross bar strut. Not sure if it makes any difference...

Post #286967 12th Jan 2016 10:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4906

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

As long as it is on the aluminium extruded section and there is 700 mm minimum distance between front & rear cross bars. Some people have noted it is better to place the front bar back a bit to reduce noise. Thus the rear bar would be placed further back to maintain at least 700 mm spacing (centre to centre).

If you are carrying a long load the front one would be better being more forward. On the other hand if you have a roof box placing them both further back would be better to reduce noise and for streamlining air flow.

Mine are on there simply for pure decoration & to hang onto while cleaning the roof once a year! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #286973 12th Jan 2016 11:11 pm
View user's profile Send private message View poster's gallery Reply with quote
X_DrN



Member Since: 24 Aug 2015
Location: Durham
Posts: 8

United Kingdom 2013 Freelander 2 TD4 GS Manual Orkney Grey

Thanks for that. I'm using a box which isn't too long so have placed the rear bar just infront of the cross bar - that gives plenty of room to adjust the front bar if something longer is used, and keeps things as central to the wheel base as possible.

Post #287064 13th Jan 2016 4:25 pm
View user's profile Send private message View poster's gallery Reply with quote
wurzel153



Member Since: 18 Dec 2011
Location: Gloucestershire
Posts: 301

2014 Freelander 2 SD4 HSE Lux Auto Loire Blue

Stick everything as far back as you can, from my experience much quieter and no vibrating roof box. Also this allows you to stand on the rear wheel to fill the roof box instead of standing on the rear seats.

Last edited by wurzel153 on 13th Jan 2016 5:48 pm. Edited 1 time in total

Post #287067 13th Jan 2016 5:47 pm
View user's profile Send private message View poster's gallery Reply with quote
ronp



Member Since: 15 Jun 2009
Location: 🌲Galloway🌲
Posts: 1477

Scotland 

I regularly carry kayaks on my roof so have the rear crossbar just behind the brace bar, with the front crossbar slightly in front of the 'B' pillar.

Also, when strapping down, I strap down to the brace bar on the rear and the crossbar on the front - just gives added peace of mind [in case of crossbar failure] FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Post #287068 13th Jan 2016 5:47 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site