Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Replacing battery |
|
|
gravon 42 Member Since: 10 Jan 2013 Location: Birmingham Posts: 522 |
Battery flat when I went to start it this morning. So bought new one as I am going abroad
|
||
12th Apr 2014 11:23 am |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2594 |
Maybe any fault codes stored but radio will be fine. You may have to reset the windows but not sure. |
||
12th Apr 2014 11:44 am |
|
archie98 Member Since: 18 Oct 2011 Location: derbyshire Posts: 709 |
Just reset the windows thats all you need to do |
||
12th Apr 2014 12:20 pm |
|
Aussie Battler Member Since: 17 Apr 2013 Location: Apsley Posts: 93 |
I had to disconect my battery when fitting an eletronic brake controler and the problem that I had was that the reversing camera would not work and had to be reset which was a fairly complicated procedure ,took me about 3 days to work it out .Then recently I had to change the battery so I used my ctek battery charger on supply mode and kept the vechicle alive while changing battery, worked no worries.
|
||
12th Apr 2014 1:05 pm |
|
gravon 42 Member Since: 10 Jan 2013 Location: Birmingham Posts: 522 |
Thanks chaps, done! What a pain in the arse to do! Ended up with a jubillee clip on
|
||
12th Apr 2014 2:18 pm |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
I removed the two positive cables, left the connector block on the positive terminal, looped a cable tie around it and effed and jeffed until it came out! Fitting the new one was easier as it had a handle built into it. Past: FL2 TD4 HSE Auto
|
||
12th Apr 2014 4:49 pm |
|
Aussie Battler Member Since: 17 Apr 2013 Location: Apsley Posts: 93 |
Much the same but I got the Missus to lift the battery |
||
13th Apr 2014 7:30 am |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
A true Aussie. Past: FL2 TD4 HSE Auto
|
||
13th Apr 2014 8:15 am |
|
Aussie Battler Member Since: 17 Apr 2013 Location: Apsley Posts: 93 |
It was a mug of coffee with a generous splash of Ord River rum a local delicacy ,no flag unfortunatly ,had to hold the leads
|
||
13th Apr 2014 12:25 pm |
|
MidlandRover Member Since: 30 Jun 2013 Location: Derby Posts: 496 |
Probably best not to have a fag when dealing with batteries. FL2 SD4 Metropolis Auto Santorini Black / ivory completely stock.
|
||
13th Apr 2014 12:56 pm |
|
bish789 Member Since: 30 Apr 2012 Location: St. Andrews Posts: 512 |
I would have taken the passenger seat out, took the bonnet off, and removed the windscreen, got in the car and pulled from above. More leverage |
||
13th Apr 2014 12:57 pm |
|
gravon 42 Member Since: 10 Jan 2013 Location: Birmingham Posts: 522 |
Used the car today after replacing the battery. I don't know whether it is my imagination,
|
||
13th Apr 2014 7:00 pm |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1386 |
There is a forum member who had a badly made earth lead which caused all kinds of problems with his FL2 for a couple of years. It could be that when you changed the battery you improved the earth on your car.
|
||
13th Apr 2014 7:13 pm |
|
gravon 42 Member Since: 10 Jan 2013 Location: Birmingham Posts: 522 |
I had already added another earth lead after reading about the mod on
|
||
13th Apr 2014 7:17 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis