I better start getting prices together for the tooling lol  2012 DISCOVERY 4 GS AUTO ORKNEY GREY
2012 FREELANDER 2 SD4 GS AUTO BALTIC BLUE - GONE
2011 FREELANDER 2 TD4 GS MANUAL BALI BLUE - GONE

Tested mine out today and it's brilliant except that it's very quiet, even on max vol. I wonder if I have taped over the speaker. Will have to pull the dash out and have a look. I see it's possible to remove the back (first remove the mount, then push through the hole, apparently. Maybe this would help. Anyone else had a sound problem so far?

Update on this: I took off some of the extra parcel tape I had put on the back - specifically over the speaker holes , and it's now louder. Also took out the foam piece under the "speaker plate" before I put the dash back. It's now just about loud enough to hear, though still on full volume. Looks like it's no longer possible to remove the back of the unit. I think I came across an out-of-date user manual there.

For an ideal install it ought to be wired into an extra amp and speaker, I think, but that's a minor quibble for an otherwise excellent mod at a fraction of the price for the LR fitment.

I agree, it is a little quiet, although I must admit to turning the sound way down anyway as I prefer just the visual reference, it works very well though, lovely clear screen and with the OS map colours loaded it looks good too.

Taz, can you give me a link to the OS style? I couldn't find it on the site you linked to earlier.

Thx

 2012 DISCOVERY 4 GS AUTO ORKNEY GREY
2012 FREELANDER 2 SD4 GS AUTO BALTIC BLUE - GONE
2011 FREELANDER 2 TD4 GS MANUAL BALI BLUE - GONE

I just tried the link and it's the one at the bottom of the page UK_OS

Think I am down your way Wednesday night, will let you know

Got it. Eyes getting older lol

This is the direct link
http://www.colorschemeeditor.com/download.php?download=36

I'm going to be in Netherlands until Thursday night, so if you are still around then give me a ping!

J 2012 DISCOVERY 4 GS AUTO ORKNEY GREY
2012 FREELANDER 2 SD4 GS AUTO BALTIC BLUE - GONE
2011 FREELANDER 2 TD4 GS MANUAL BALI BLUE - GONE

That's a shame, I am there Wednesday night and Thursday morning then fly off to Warsaw, try again next time, enjoy the Netherlands and be careful with the cakes

Pity

Travelling too much just lately. Spend more time in hotel rooms than in my own home...

Maybe see you in Warsaw  2012 DISCOVERY 4 GS AUTO ORKNEY GREY
2012 FREELANDER 2 SD4 GS AUTO BALTIC BLUE - GONE
2011 FREELANDER 2 TD4 GS MANUAL BALI BLUE - GONE

http://www.dentalholding.com/
I'm on at 10:15, I wish I could read Polish, I would have an idea of what I am doing there

Apologies for a stupid question...


...but would a 7" display SatNav fit, or would the screen edges be too close to, or even hidden behind, the dash?

Anyone in Derby want to earn themselves 50p fitting me a TomTom Start 60???

Thank you,
Harvey

Harvey, it is quite straightforward, the hardest part for me was the centre speaker cover, it was very stiff, everything else from there was very straightforward.

Hi harvey

i work in Derby if you want to look at installation just PM me . Like Taz says the only tricky bit is getting out centre speaker cover.

Harvey, the problem with a seven-inch is that the unit might not fit in the space available behind the gap. Screen might also be slightly obscured as the Start60 only has a small rim showing top and bottom.
Update to my earlier postings - I've now used this several times and can find no problem whatsoever. Sound is loud enough now that I've taken out the foam disc from the top panel, the Halfords DS tape is holding well, and the electrics are all working fine. I find the speed camera warnings on the TomTom a bit haphazard, but overall it has more features than my old Garmin Nüvi and is generally less annoying!
to Kitchener who thought this up in the first place.

Have decided to fit a couple of brackets behind TT , just in case when winter arrives and hot air from vents makes tape not as secure.

Put images into gallery. The top of bracket is fastened with the screws which held cubby box to console using a couple of cir clips. The bottom of the bracket slots into the holes which held the bottom of the cubby box. I put double sided tape on the back of TT which sticks to the brackets. The brackets hold under tension the TT firmly against the console.