![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > I'm usually quite handy but.............grrrrrrrrrrrrrrrrrrr |
![]() ![]() |
|
|
russben Member Since: 03 Dec 2010 Location: lancashire Posts: 314 ![]() ![]() ![]() |
Are they the genuine LandRover mudflaps? I fitted some and it took me around 30 minutes to fit the first side, then 15 to fit the second side. I seem to recall it was a bit fiddly to line everything up but are nice and secure once on. Poke it, Poke it, make it do it again!!
|
||
![]() |
|
Annie Member Since: 20 Oct 2011 Location: Lincolnshire Posts: 375 ![]() ![]() ![]() |
Yes they are genuine and now i'm even more embarrassed |
||
![]() |
|
russben Member Since: 03 Dec 2010 Location: lancashire Posts: 314 ![]() ![]() ![]() |
Persevere. Just think how proud you'll be when you've finished fitting them. |
||
![]() |
|
Annie Member Since: 20 Oct 2011 Location: Lincolnshire Posts: 375 ![]() ![]() ![]() |
Thanks. The instructions aren't very clear to me. I've done the left one and the right one looks simpler (only drilling on that one i think, which i've done) but i think the instructions are really poor and not very clear.
|
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
I seem to remember someone saying they were easier if warm, stick the flap in a bucket of hot water for 20 minutes. |
||
![]() |
|
Annie Member Since: 20 Oct 2011 Location: Lincolnshire Posts: 375 ![]() ![]() ![]() |
Thanks for the tip. I'll have another go tomorrow.
|
||
![]() |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1782 ![]() ![]() ![]() |
You are not a stupid woman, far from it, or if you are I am a stupid man and loads of others to boot. I put the flaps on on Wednesday, the LR instuctions are as clear as mud ! and had me pulling my hair out ( or it would have done if I had any) why they couldn't have used a series of step by step photographs with written instructions is beyond me, the line drawings are terrible, the sequencing rubbish and even their designations of left hand and right hand are confusing ! it took me four times as long to fit the fronts as the rears, surprisingly when the job is finished the fit is very good.
|
||
![]() |
|
Annie Member Since: 20 Oct 2011 Location: Lincolnshire Posts: 375 ![]() ![]() ![]() |
Thanks Martyn |
||
![]() |
|
AndyC Member Since: 30 Nov 2007 Location: Where the snow dosen't melt when the sun is shining! Posts: 4165 ![]() ![]() ![]() |
Well if there were any real men on here I am sure they would have been queuing up to help you, but alas ![]() Stornoway Grey with Ebony Black Pleather, Clear Indicators, Body Side Mouldings etc. |
||
![]() |
|
Navigator Member Since: 29 Dec 2010 Location: Within reach of the coffee machine Posts: 492 ![]() ![]() |
I've not seen the instructions, but that probably means I already know more about fitting them than someone who has. If the D3 instructions are anything to go by, then the drawings can only be understood by someone who has already done the job at least twice.
|
||
![]() |
|
russben Member Since: 03 Dec 2010 Location: lancashire Posts: 314 ![]() ![]() ![]() |
I would have offered, but I'm not exactly local. Poke it, Poke it, make it do it again!! Gone - 2008 Freel2 HSE Santorini Black Hello - 2010 RRS TDV6 3.0 HSE Santorini Black |
||
![]() |
|
Annie Member Since: 20 Oct 2011 Location: Lincolnshire Posts: 375 ![]() ![]() ![]() |
Thank you chaps for your help and encouragement and it was a relief that it wasn't only me who thinks the instructions are a bit useless. It was the drawings that i couldnt actually see what was going on.
|
||
![]() |
|
russben Member Since: 03 Dec 2010 Location: lancashire Posts: 314 ![]() ![]() ![]() |
No problem. Always happy to help. |
||
![]() |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1782 ![]() ![]() ![]() |
Brilliant Annie ! |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)