Following on from replacing the front mudshields
https://www.freel2.com/forum/topic39322.ht...p;start=15
Im now looking to replace the rear ones.

Being a 2014 EPB model the part numbers are LR039936 and LR039937.

Unlike the fronts they are not intended to be replaced with the hub in place (stupid design).
But cutting with tin snips allows the mudshield to be twisted and passed over the hub. Obviously being very rusty helps to bend the metal. (see the cut in the pic)

Click image to enlarge

Cheapest rear (late model) mudshields Ive been able to find are from Matlings 4x4 (£33 ea) .

Obviously will need some fettling to get them on without removing the hub.

Many places just dont have them any more. Jules

On a previous vehicle, I cut them, fitted and then tack welded them. Avoided removing the hub...

Thanks - Good idea - I'll probably do the same. Jules

Quote:

jules wrote:

Cheapest rear (late model) mudshields Ive been able to find are from Matlings 4x4 (£33 ea) .

Obviously will need some fettling to get them on without removing the hub.

Many places just dont have them any more.

Yes, despite accepting payment. Maltings 4x4 dont actually have any for sale.

Plus their supplier cannot give them a delivery date.


Anyone found any actually available ?

Anyone know which other FOMOCO vehicle uses the same mudshield, if any ?

Is there a way of relating LR part numbers to Ford ones ? Jules

jules i remember reading somewhere that the brakes are the same as the ford galaxy ? but i never looked into it might be worth a look / cross reference . 2009 FL2 S now gone
2011 FL2 HSE AUTO
2012 FL2 XS AUTO
2000 Kawasaki er 5

I had a look online at the 2006+ Galaxy but I couldnt find any pics that looked the FL2 rear disk splash guard.

Maybe I should look at the then Volvo - but which one ? Jules

I found the mintex brakebook good for cross referencing,

https://www.brakebook.com/bb/mintex/en_GB/...arch.xhtml

Looks like despite the calipers/pads being shared, the discs are unique to fl2 so possibly the brake shield is too.

Rimmer Bros have only got the one side.
Order expected Dec 2024 - maybe Jules

Just been contacted by Maltings 4x4 - they will have them in stock on 10th November. Ive left my order with them. Jules

Quote:

Jules
Just been contacted by Maltings 4x4 - they will have them in stock on 10th November. Ive left my order with them.

Jules

@ Arctic. Have got them now.

I contacted Matlings at the end of Nov for an order update as had heard nothing. They contacted their JLR part supplier for an update; was told "parts are on the way". The parts arrived last week, whilst I was hill walking in the Dales.

Wont be fitting them for at least a few days as the weather has turned a bit nasty.

It'll give me time to work out just where to cut them so as to install them without removing the hub.
The last set lasted 10 years so I'll just tack weld the cut and repaint - I doubt I'll need to replace them again.  Jules

Interestingly they came in bags with JLR stickers and each has a "Landrover" logo stamp but no part numbers or FoMoCo stamped anywhere, unlike the replacment front mud shields.



Maybe they really are a part bestoke to the FL2 Jules

Quote:

jules wrote:

@ Arctic. Have got them now.

I contacted Matlings at the end of Nov for an order update as had heard nothing. They contacted their JLR part supplier for an update; was told "parts are on the way". The parts arrived last week, whilst I was hill walking in the Dales.

Wont be fitting them for at least a few days as the weather has turned a bit nasty.

It'll give me time to work out just where to cut them so as to install them without removing the hub.
The last set lasted 10 years so I'll just tack weld the cut and repaint - I doubt I'll need to replace them again.

Hi Jules.
Thank you for reporting back that they arrived, i will go on the hunt to see if they have any left, do let us know how the fitting goes