Freel2.com - View topic - HEADLIGHT DEFLECTORS HOW TO FIT


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > HEADLIGHT DEFLECTORS HOW TO FIT

Page 1 of 4

Print this entire topic ·

LRCRAZY321

Member Since: 24 May 2010
Location: BELPER/DERBYS
Posts: 112

2007 Freelander 2 TD4 SE Manual Tambora Flame

HEADLIGHT DEFLECTORS HOW TO FIT

anyone know how or where to fit the deflectors to a freelander 2's lights as the lens dont give any clue,any help would be appreciated because we drive out on friday 28th.
cheers
simon

24th May 2010 8:21 pm

alex_pescaru

Member Since: 12 Mar 2009
Location: RO
Posts: 4642

If you mean deflectors for driving in Europe, then Mother Search do wonders: http://www.freel2.com/forum/topic4042.html

24th May 2010 8:52 pm

Tandemman

Member Since: 30 Jun 2007
Location: Barnsley
Posts: 686

2009 Freelander 2 TD4 GS Auto Rimini Red

If you are using beam benders, they have to be placed in relation to the small round index mark visible on the light unit .

25th May 2010 4:40 am

New2LR

Member Since: 26 Jul 2009
Location: Norfolk
Posts: 39

2013 Freelander 2 SD4 HSE Lux Auto Indus Silver

I've heard that there have been cases of black masking tape damaging the lamp (normal bulb not Xenon) Has anyone had a problem with the freelander?

1st Jun 2010 4:38 pm

BFGLR2Man

Member Since: 17 Nov 2008
Location: Gutersloh
Posts: 167

2010 Freelander 2 TD4_e HSE Manual Alaska White

No, a quick bit of meths will take of any residue Freelander 2.2e HSE , Privacy, Fully debadged, 19" Chrome SHadow alloys

10th Jun 2010 12:13 pm

ant

Member Since: 03 May 2008
Location: Colchester
Posts: 48

2007 Freelander 2 TD4 S Manual Baltic Blue

I bought some EGR headlight protectors, fitted the beam deflectors to them and then take them on and off when travelling abroad. Thanks to Mick on D3 for his advice on that one. FL2 TD4 S Baltic Blue, with twin electrics and towbar, roofrails, luggage cover, spare wheel and mudflaps.

10th Jun 2010 8:58 pm

Past master

Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

New2LR wrote:
I've heard that there have been cases of black masking tape damaging the lamp (normal bulb not Xenon) Has anyone had a problem with the freelander?

I used black electrical tape last week, as the deflectors I had bought fell off. It has caused a definite crazing of the surface of the headlights, even after the glue residue was removed with meths. It won't affect the lighting, and it's barely visible, but I know it's there! If I had had time I'd have got a roll of sticky-back plastic, which may be better.

11th Aug 2010 3:43 pm

New2LR

Member Since: 26 Jul 2009
Location: Norfolk
Posts: 39

Thats interesting. Did you use your headlamps a lot?

I had electricians tape on for over a month and can see no signs of crazing after giving it a good clean off with paint brush cleaner. However I very rarely used the headlamps, just in tunnels.

9th Sep 2010 7:53 pm

Lukey Luke

Member Since: 09 Nov 2008
Location: Celles
Posts: 82

2009 Freelander 2 TD4 HSE Auto Stornoway Grey

if you have Xenon's, i think they are meant to have a switch on the back you can pull to drop the light beam down for driving in the EU? HSE, Auto, Colour - Yes

9th Sep 2010 8:59 pm

Past master

Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

New2LR wrote:
Thats interesting. Did you use your headlamps a lot?

I had electricians tape on for over a month and can see no signs of crazing after giving it a good clean off with paint brush cleaner. However I very rarely used the headlamps, just in tunnels.

Had them on auto, and lots of tunnels, so yes probably on a lot! I think it must just be toe type of glue.

And to the other query, yes, Xenons have a lever on the back. It's explained in the handbook. However the procedure for non-xenons is NOT explained - thanks again Land Rover!

24th Sep 2010 4:33 pm

LRCRAZY321

Member Since: 24 May 2010
Location: BELPER/DERBYS
Posts: 112

just a quick update
i followed the instructions my local dealer gave me, by the time i got to nantes they had come off leaving a sticky film on the lens which disappeared once it had rained!!!!.
all in all pretty goddam useless

24th Sep 2010 4:50 pm

Past master

Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

New2LR wrote:

I had electricians tape on for over a month and can see no signs of crazing after giving it a good clean off with paint brush cleaner. However I very rarely used the headlamps, just in tunnels.

Looking around on t'internet, I see some tapes and films are specified with "solvent based adhesive". I suppose these could attack the plastic headlamp surface. It's difficult to get full spec details, but I thought I'd try Fablon next, as it is easy to cut to shape and is claimed to be easily removable from most surfaces.

26th Sep 2010 4:11 pm

Past master

Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

LRCRAZY321 wrote:
just a quick update
i followed the instructions my local dealer gave me, by the time i got to nantes they had come off leaving a sticky film on the lens which disappeared once it had rained!!!!.
all in all pretty goddam useless

The ones I got from local car spares shop fell off before I even got to the channel.

26th Sep 2010 4:13 pm

Andy131

Member Since: 09 Dec 2009
Location: Manchester
Posts: 2182

The ones we got from Halfords stayed on for the trip to Germany in the "summer" and despite eight days of rain in nine days they were still there when we got back to Dover. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

26th Sep 2010 10:09 pm

Past master

Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

Andy131 wrote:
The ones we got from Halfords stayed on for the trip to Germany in the "summer" and despite eight days of rain in nine days they were still there when we got back to Dover.

Lucky man. I tried Halfords but they had sold out. And I couldn't wait for new stock as I was about to leave. No I hadn't left it to the last minute - I had believed the instructions in the owner's handbook. But I do object to paying for these things every time I go abroad, so I think I'll continue to experiment with black plastic, at least for now. Getting the headlamp protectors would make some sense, but I don't think I go abroad quite often enough to justify that either.

27th Sep 2010 1:23 pm

Page 1 of 4

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum