Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > electric windows! |
|
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
Had a motor swapped on drivers window under warranty a couple of months ago.Now in the last week or so the driver and driver passenger are plying up. Driver goes up in increments while rear one stops and won't move.
|
||
26th May 2014 5:00 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
Martin, on the one that goes up in increments you could try this procedure.
|
||
26th May 2014 5:14 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
As I hold the button the window only moves 3inches or so and stops. It takes 4 or 5 attempts to close?
|
||
26th May 2014 5:25 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
And now the rear drivers side door won't unlock!
|
||
28th May 2014 4:10 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
Could be the motor on the door lock, usually it fails to lock rather than unlock, nine times out of ten it's the offside rear that seems to fail first. |
||
28th May 2014 5:11 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
Are the window not moving and door not unlocking related?
|
||
28th May 2014 5:47 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
Rear door now will not lock😧 |
||
1st Jun 2014 1:25 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
Seems odd to me too
|
||
2nd Jun 2014 9:22 pm |
|
rizzonland Member Since: 18 Oct 2012 Location: uk Posts: 3 |
Hi,
|
||
3rd Jun 2015 9:28 pm |
|
martindoggy Member Since: 13 Oct 2012 Location: mansfield Posts: 95 |
Changed the control unit on the drivers door, but very very rarely still happens |
||
3rd Jun 2015 9:40 pm |
|
rizzonland Member Since: 18 Oct 2012 Location: uk Posts: 3 |
Was it a big job (expensive?). Seems strange that it still happens even with a new controller. |
||
3rd Jun 2015 10:18 pm |
|
Jim NI Member Since: 30 Mar 2010 Location: NI Posts: 447 |
DDM is around £55 and needs programmed to the car. Fitting takes 5 mins, programming takes few minutes but I'm sure they will hit you for couple of hours labour and make it sound a big job. 2014 SE Loire Blue SD4 Auto (MY15)
|
||
4th Jun 2015 10:39 am |
|
Jim NI Member Since: 30 Mar 2010 Location: NI Posts: 447 |
Forgot to add that when programming a door module on JLR system, it has a pop up message advising that door modules should be changed in pairs (by side). So they will double your bill 2014 SE Loire Blue SD4 Auto (MY15)
|
||
4th Jun 2015 10:42 am |
|
Landiroamer Member Since: 30 Apr 2015 Location: Devon Posts: 1185 |
If the window keeps cutting out when going up in increments it could be the mechanism is stiff or the window in its guides is not as free as it ought to be because of muck etc and that causes the safety cut out to operate as it thinks theres an obstruction in the way?? |
||
4th Jun 2015 1:17 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis