Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Shuddering in a Straight Line. Help! |
|
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3107 |
I am surprised that your 'Specialist' Garage was so vague with it's diagnosis.
|
||
14th Jun 2024 1:03 pm |
|
Grue Member Since: 29 Apr 2018 Location: New Zealand Posts: 364 |
Had a really bad one a month or so ago. Was convinced it was the torque converter finally given up. Was as simple as a wheel alignment needed.
|
||
14th Jun 2024 9:33 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Mag spec, I had a judder? At certain speeds which I describe as “ cattle grid rumble”
|
||
15th Jun 2024 6:44 am |
|
Magspec69 Member Since: 02 Jun 2024 Location: Basildon Essex Posts: 11 |
Gearbox Flushed, Software update and looks lie a new prop fitted. I`m going to try changing the wheels round, rear tyres slightly bigger than front, although all new. On my Sorento, new Tyres always on rear as rear wheel drive, Freelander front wheel drive, Slightly bigger on front I suppose, otherwise, back to the dealer. Paul Hayes |
||
15th Jun 2024 10:12 am |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 625 |
Tyres should ALL be the same size other wise it can/will cause problems with the drive train damage could have already been done? get the dealer to sort it. Good Luck. 2013 FL2 XS.
|
||
15th Jun 2024 10:40 am |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1367 |
If the Haldex is working as designed tyre wear front to rear is irrelevant as long as they are the same badged size as the Haldex completely disengages the drive front to rear above 15 to 20 mph.
|
||
15th Jun 2024 11:08 am |
|
Magspec69 Member Since: 02 Jun 2024 Location: Basildon Essex Posts: 11 |
Thanks everyone. Paul Hayes |
||
15th Jun 2024 12:30 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3107 |
Tyre wear is no problem for the FL2, as indicated above the haldex is electronically engaged/disengaged.
|
||
15th Jun 2024 3:49 pm |
|
Magspec69 Member Since: 02 Jun 2024 Location: Basildon Essex Posts: 11 |
Only had it 6 weeks info is vague Paul Hayes |
||
15th Jun 2024 3:54 pm |
|
Magspec69 Member Since: 02 Jun 2024 Location: Basildon Essex Posts: 11 |
Feels like driving a manual in too high gear, shudders from rear intermittently, lift or accelerate and it stops till next time which could be straight away or not. Happens any time at 30, 40, 50 mph. Transmission flushed and software update. Also looks like it has had a new rear prop. No definitive diagnosis from local independent Land Rover shop, could be torque converter, front drive shafts, haldex or rear diff. Paul Hayes |
||
15th Jun 2024 4:08 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 959 |
Pull the Haldex fuse & try driving around again. You will get terrain response warnings but they will go away once you refit the fuse. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
|
||
15th Jun 2024 11:16 pm |
|
RPoul87 Member Since: 23 Apr 2021 Location: Woking Posts: 81 |
Seized rear brakes? The judder is how I found out my rear brake callipers needed refurbing / replacing Corrado VR6 Mystic Blue - Gone
|
||
15th Jun 2024 11:45 pm |
|
Chrism551 Member Since: 01 Feb 2021 Location: Blackpool Posts: 149 |
Check your handbrake shoes are fully releasing, might have one shoe dragging which will cause this. I had this really bad on the motorway, two days after i bought mine and had fears of bad gearbox or rear diff etc. turned out the handbrake cables had slight splits in the outer cover allowing water in, which in turn rusted the cable causing them to stick when releasing. On further inspection the rear shoes had cut grooves into the drums rendering the whole lot scrap. |
||
16th Jun 2024 10:18 am |
|
Magspec69 Member Since: 02 Jun 2024 Location: Basildon Essex Posts: 11 |
Thanks for your replies, will try haldex fuse and check brakes. Paul Hayes |
||
16th Jun 2024 10:34 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis