Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Search
Search found 27 matches

Author Message
 Play in steering rack
virtualrog

Post7th Nov 2020 5:08 pm
Forum: Technical · Replies: 8 · Views: 3344 · Subject: Play in steering rack
finally done this, for anyone who wants to do their inner track rod.

Cost of part £14

The issue i had was play in one side of rack when there is no movement in track rod end.

You can get the ...
 Play in steering rack
virtualrog

Post16th Oct 2020 9:20 am
Forum: Technical · Replies: 8 · Views: 3344 · Subject: Play in steering rack
Not yet got round to looking at this but a quick look under the car seems to indicate I will have problems getting to the lock nuts with the rack in (offside). There was a thread about removing the ra ...
 Play in steering rack
virtualrog

Post24th Jun 2020 1:37 pm
Forum: Technical · Replies: 8 · Views: 3344 · Subject: Play in steering rack
Thanks for the replies, the tester was just noting there was a difference between the two sides so he said worth a look to check nothings wrong.

Roger
 Play in steering rack
virtualrog

Post24th Jun 2020 12:26 pm
Forum: Technical · Replies: 8 · Views: 3344 · Subject: Play in steering rack
I have a small amount of play on the nearside inner steering rack joint, I understand there is a joint under the gaiter and you can buy new ones. (its not the trackrod end). The MOT station said its n ...
 Oil service required visit dealer
virtualrog

Post10th Jun 2020 12:12 pm
Forum: Technical · Replies: 26 · Views: 23528 · Subject: Oil service required visit dealer
I have 2012 plate and brought a Icarsoft LR11 reader as it allows you to reset oil servce indicator, also has lots of real time data you can view.
luckly it also work on my L322.

Roger
 Why a FL2 and not a Disco 2 , 3 or 4?
virtualrog

Post18th Nov 2019 12:30 pm
Forum: General · Replies: 21 · Views: 7096 · Subject: Why a FL2 and not a Disco 2 , 3 or 4?
I have owned a Disco 2 and currently have a Freelander 2.
The Freelander is a better tow car as the distance between the back wheel and the tow ball is significantly less and hence a caravan has less ...
 Haldex making wheels judder...
virtualrog

Post29th Jan 2019 12:19 pm
Forum: Technical · Replies: 44 · Views: 16034 · Subject: Haldex making wheels judder...
Don't know why they changes to rubber mount, mine came out with a couple of sharp hits with cold chisel and large hammer.
 Haldex making wheels judder...
virtualrog

Post28th Jan 2019 1:16 pm
Forum: Technical · Replies: 44 · Views: 16034 · Subject: Haldex making wheels judder...
A serviced mine a couple of years ago have a look at this link
http://www.freel2.com/forum/topic28400.html

Not too hard but would put on stands so you can rotate drive shaft to get it off.

My u ...
 Bike carriers
virtualrog

Post14th Feb 2017 12:43 pm
Forum: General · Replies: 12 · Views: 4768 · Subject: Bike carriers
I use the witter one that has a plate you bolt between the tow ball and the back plate, (won't work on a swan neck).
You need the one with a bend in it so the bikes clear the tailgate.
You have to l ...
 Future of electric cars
virtualrog

Post9th Feb 2017 12:53 pm
Forum: General · Replies: 47 · Views: 18228 · Subject: Future of electric cars
The vision of an electric car future has a few flaws, The idea of solar panels on a car would not generate
enough power for a standard car. The energy per m2 available is only around 110w and panels ...
 Haldex fault - self service
virtualrog

Post17th Jan 2017 1:22 pm
Forum: Technical · Replies: 12 · Views: 6323 · Subject: Haldex fault - self service
I usually use axle stands but this time I drove it onto two large pieces of timber around 3 inchs high.
The problem I had was you can't turn prop shaft without moving car so had to roll it forward on ...
 Haldex fault - self service
virtualrog

Post15th Jan 2017 5:33 pm
Forum: Technical · Replies: 12 · Views: 6323 · Subject: Haldex fault - self service
Yes just a clean out. I flushed the unit with paraffin, I had a look at the clutch unit but thought best
Left alone as I couldn't work out how it came apart.
The main issue was the gunk on the moto ...
 Haldex fault - self service
virtualrog

Post13th Jan 2017 5:56 pm
Forum: Technical · Replies: 12 · Views: 6323 · Subject: Haldex fault - self service
Problem now fixed .
I brought a service kit from Bell Engineering I thought I would share how it was serviced.

My car is 2012 model so a gen 4 unit

Firstly thanks to bell engineering for the ad ...
 Haldex fault - self service
virtualrog

Post9th Jan 2017 11:08 am
Forum: Technical · Replies: 12 · Views: 6323 · Subject: Haldex fault - self service
Think I will order a service kit from Bell engineering and see what's its like inside.
Still keen to know if you can test the pump to be sure it works before I put the unit back together

Roger
 Haldex fault - self service
virtualrog

Post8th Jan 2017 6:01 pm
Forum: Technical · Replies: 12 · Views: 6323 · Subject: Haldex fault - self service
If I take the unit out and service it how do I know if the pump is okay or pressure sensor is okay

Roger
 
All times are GMT

Jump to  
Page 1 of 2 12>



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site