Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Wading |
|
|
EdSnow Member Since: 28 Feb 2008 Location: Norfolk Posts: 131 |
There are rubber seals and provided you keep a good bow wave and don't stop you'll get an air pocket. Ok you might get a few splashes but land rover specifically routed it to the wing as just behind the wheel is the low point of water when going steady. Freelander 2 XS 2.2 TD4 Met Black, with Winter pack, 18" alloys with General Grabber AT2 wellies, MANTEC Sump and Tank Guards |
||
4th Apr 2011 8:45 pm |
|
walsherz Member Since: 22 Oct 2010 Location: At the front of the queue Posts: 70 |
If you wanted to lessen the chances of water getting in what should you do? (apart from fitting a snorkel which you cant get )
|
||
4th Apr 2011 11:35 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13289 |
As Ed says speed is king, dont stop what ever you do, equally important is to keep the engine revs up a bit. this prevents sucking water up the exhaust. so drive slowly with plenty of revs, then remember that flooded roads can sometimes be washed out so drive slowly and carefully ready to quickly select reverse without loosing engine revs should the front wheels feel like they are dropping in a hole.
|
||
5th Apr 2011 7:17 am |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
It would be easier for the Scone Queen to have a TOWBAR fitted, the rope could be put over the ball and pull out the stranded idiot |
||
5th Apr 2011 9:59 am |
|
EYorkshire Member Since: 18 Nov 2010 Location: (!) Posts: 4392 |
It's obvious to me that Mrs CG is a Knightess in shining armour and would help anyone fallen by the wayside, and they do say opposites attract. |
||
5th Apr 2011 10:08 am |
|
BrianAbbott Member Since: 28 Dec 2010 Location: Teesdale Posts: 169 |
Went on a LR discovery 1/2 day yesterday. (Well worthwhile!). Re wading, the instructor said:
|
||
6th Apr 2011 1:33 pm |
|
walsherz Member Since: 22 Oct 2010 Location: At the front of the queue Posts: 70 |
Good idea about reversing in and that will apply to any vehicle I suppose.
|
||
6th Apr 2011 4:45 pm |
|
W.D.C.A.P.H. Member Since: 19 Feb 2010 Location: Stonehenge Posts: 310 |
If reversing in, don't forget that normal rules re exhaust still apply. Keep the revs up. We Don't Care About Pot Holes !! |
||
6th Apr 2011 8:44 pm |
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 490 |
Reversing works to a point, but DON'T do it if the water is flowing. The rear will float before the front does, so if you do this in moving water you get swung around to face upstream and your front wheels get dragged around and out into the deeper water.
|
||
6th Apr 2011 10:09 pm |
|
W.D.C.A.P.H. Member Since: 19 Feb 2010 Location: Stonehenge Posts: 310 |
There's a few very good points mate. Too true, sadly, the power of water is too often underestimated. We Don't Care About Pot Holes !! |
||
6th Apr 2011 11:14 pm |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13289 |
If in any doubt go round, as I said there are many cars drowned locally during each flood, Dont think LR's are exempt a local farmer had to repair the gear box on his range rover after water got in whilst wading.
|
||
7th Apr 2011 7:15 am |
|
NoDo$h Member Since: 27 May 2008 Location: fings go booooom. Posts: 490 |
He could reverse that in. It would look like a paddle steamer Current driveway contents:
|
||
7th Apr 2011 7:47 am |
|
razmabaz Member Since: 20 Feb 2011 Location: Cambridgeshire Posts: 246 |
Mississippi George! Freelander 1 TD4 HSE - gone, 2 weeks after the Cat.Converter! Freelander 2 TD4 SE Auto MY08 - Santorini black |
||
7th Apr 2011 8:37 am |
|
dunroof Member Since: 24 Nov 2010 Location: <> Yes, still being stalked by another member! Posts: 1785 |
If you want to play with water, get a boat, end of! |
||
7th Apr 2011 9:15 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis