Aha, I see now where could be the confusion... Maybe I didn't make myself clear enough.
The car stood still for 5 months _in_the_showroom_, until I've bought it.
In those 5 months was in _their_ possession, not on mines.
And it wasn't a demo car. Or at least it was a showroom demo car.
It only had 40 kms on the clock when I've bought it.
So, in my opinion, the warranty (and the service time) flows from the moment I've walk out of the showroom with it. But as I've said, I will check.

I would still look into it

40km I would presume it's been used or pre registered as 40km is quite a lot if classed as delivery miles

are you the first registered keeper?

If so It sounds like you'll be fine

I'm not trying to worry you but I would check with your dealer when they have it down for it's first service  Former Mod/Member, with the most post & Chicken George Arch nemesis

Thank you for your recommendation. I'll do that.

In those 5 months that it stood still in the showroom, here in Romania, it was a preety grim period regarding registration laws for new cars. A lot of changes, addendums, more and more increased taxes, etc.
So the dealer decided to help potential buyers and he payed the taxes for a few cars - the old taxes - before the changing of the laws. So I, as the final user, when I've bought the car, I've paid a much less tax, in fact returning to the dealer the money that he spent for it 5 months ago.
So those 40 kms I believe that are the trips with the car to various registration/authorities/verification offices.

1.Insert the key
2.With off ignition press trip recorder reset button
3.Keep pressed trip recorder reset button and press Start longer 2 seconds
4.There displays blinking message Service. After finishing of blinking release the button
5.There displays message DIST
6.A short press reset button will change messages DIST -> DATE -> END
7.Select DIST and hold the button longer 5 seconds there will display Reset and occur reset a
service distance
8.Select DATE and hold the button longer 5 seconds there will display Reset and occur reset a
service interval
9.Select END and hold the button longer 5 seconds there will finished the service mode

Just tried the above procedure but I could not reset distance? Message displayed : 'cannot reset'
Could this be to a ECU software update since this topic was first started?