Hi,

Have asked previously but information I got referred to manual handbrake consoles not the EPB switch 2013 on

So stuck with this !

Need to change my EPB switch but can’t see how you remove the centre console which I assume has to be done to access the four screws

I could have ago at attacking it but not being in prone to breaking clips etc so prefer to do it without damage

Found all the info on removing the earlier type without EPB but can find nothing for the later facelift with EPB switch

Any one got any instruction / video / reference

Thanks

I took the console out - quite easy once you know how.
Remove the plastic "ashtray" at the back - prize it straight up and then the vertical cover above it.
Lift off gear lever surround.
Undo 6 screws = 7mm socket
Pass gearlever surround through the rectangular hole in the centre console as you lift up the console.
All electricals are with 3 connectors at the back of the console.

Click image to enlarge