Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Bloody Land Rover ABS pump
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4997

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

It doesnt seem to be much of a deterrent to most thieves - they've got all the electronic gizmos anyway these days from what I see on TV. Jules

Post #429783 6th Feb 2023 4:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

They do indeed. The crooks are ahead of the manufacturers and the police, but it's designed to help reduce thefts by the casual crook. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Post #429785 6th Feb 2023 4:33 pm
View user's profile Send private message View poster's gallery Reply with quote
French Chris



Member Since: 05 Mar 2013
Location: Limoges
Posts: 17

France 2007 Freelander 2 TD4 HSE Manual Baltic Blue

Your explanation of the VIN coding is both credible and convincing ... however that does not make it any more appealing in the real world. Here, the owner should have free access to full control over all elements of the vehicle's components. Should this be by a freely issued code from the manufacturer upon proof of ownership, or not, could be a matter for debate. But free uninhibited access should be the owners right. These restrictive practices should be illegal.

As for SDD being able to overwrite an existing VIN in the ABS Brake Control Module, I would be delighted if you could prove that my failure to do this was due to operator error - in my opinion that is more than possible.

Post #429866 8th Feb 2023 7:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 2082

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

When you used SDD to set up a replacement module, what option did you use?
I've found the CONFIGURE NEW MODULE option works for a second hand ECM, which the LR dealer told me it wouldn't work but it did. I was even able to configure the incorrect Stop Start ECM to my vehicle and it still worked. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

Post #429876 8th Feb 2023 9:59 pm
View user's profile Send private message View poster's gallery Reply with quote
French Chris



Member Since: 05 Mar 2013
Location: Limoges
Posts: 17

France 2007 Freelander 2 TD4 HSE Manual Baltic Blue

Well done with those successes. When I tried it, I also used the Configure New Module route, but it wasn't having it. I tried several times without any joy, that's when I gave up and sent it to ControlUnits.

Post #429898 9th Feb 2023 7:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Uyrikss



Member Since: 26 Dec 2019
Location: Krasnodar
Posts: 1

Russia 

Good afternoon. Did you manage to solve the problem with the abs block? My car has the same problem, I haven't been able to solve it for two years.

Post #436529 23rd Oct 2023 5:07 am
View user's profile Send private message View poster's gallery Reply with quote
French Chris



Member Since: 05 Mar 2013
Location: Limoges
Posts: 17

France 2007 Freelander 2 TD4 HSE Manual Baltic Blue

Good day Uyrikss,

Ah yes, the good old ABS issue. If you look back, you can see the process I had to go through to get the system to recognise the new unit - get it "virginalised" and then re-programmed as a new module via SDD. Once this was done all should have been well, except it isn't quite. If your problem is the same as the one I have now - ABS locking on one side until stationary - then I'm afraid I can't help, as I've just lived with it and could not be bothered to investigate further. Sometimes life is just too short, and motivation too scarce.
Either way, I wish you the best of luck with yours.

Chris

Post #436621 27th Oct 2023 3:46 pm
View user's profile Send private message View poster's gallery Reply with quote
mann



Member Since: 28 Aug 2024
Location: Manila, Philippines
Posts: 2

French Chris wrote:
Once again the Land Rover gods have decided to Censored on my chips.

A big thank you for the suggestions as to how to solve the issue of my ABS module...but no luck.

Having sourced SDD and a chinese copy of the Mongoose Pro lead, I still cannot get SDD to work. Either it tells me it can't read the VIN - which I have already manually entered into the system to start with - or it tells me there is a communications error, despite SDD working in other (less important) areas. Even when I switch back to the original module (which I use to start the car and then switch over to the 2nd hand one to get rid of the ABS warnings) there is still nothing I can seem to achieve. Once again it won't se the VIN.

I have even tried the good bods at GAP Diagnostics to see if their IID tool will do the job. Their reply was "We can add the routines in the tool for ABS replacement but we cannot say it will work for a used ABS unit." Helpful in itself, but not enough for me to risk £400 for a tool that may not work.

Any additional suggestions - either about what I'm failing to do with SDD, or whatever else I can try - would be most gratefully received. It is inconceivable that I am the first to have address such an issue, what solution have other folf found?

Alternatively I may just need to find a convenient cliff to push the bloody thing over!



Sorry for replying to an old post.

Just a heads up for everyone, using GAP IID with the help of Patrick, we have managed to mate a used/replacement ABS to a FL2 / LR2 with VIN SALFA2BD9BH###### and make it start this week.
Just make sure numbers / marks of existing ABS and used ABS are the same.
I dont work for GAP ... I do run a LR independent shop.

I just wanted to share this since I've gotten a lot of valuable info in this forum and I thought I'd do my part and share this info for those who are and will encounter the same problem.

Post #444509 5th Sep 2024 9:28 am
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1354

Canada 2008 LR2 i6 SE Auto Tambora Flame

jules wrote:
whose security?

I still dont understand why an ABS unit needs to be coded to a VIN

Is there an organised crime syndicate selling stolen ABS units for Landrovers ?

Yes, LR themselves...it does not need to be coded ( they just make it so) just only fixed by greedy LR until they tell you a price that makes the repair not viable or they simply refuse to fix the problem out of warranty. Amazingly short term thinking business model.

Post #444511 5th Sep 2024 11:53 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site