Gates parts

KP25633XS Cambelt and waterpump kit
K106PK1745 Aux belt kit

Plus locking tool and rotary torque guage.

Remember only the Gates kit has a new crankshaft bolt supplied.

All above delivered £150 . No offers please as I think this is a good price.

Right final offer is £125 before they go on fleabay.

Is this still available or did it sell?

Hi

Still have as like a lot of things was something I was going to get around to do, ie putting in fleabay.

Thanks

Interested? Or they are off to bay.

Hi, I'm in the process of finding out if sd4 and the td4 take the same belt and how much hassle it is to change. Just list it on ebay I'm not sure how long it'll be till I find out from my mate

Well I can tell you is the same kit. Plenty of vidoes on ebay avout doing the job one is put up there by Dayco.

Billhavelock wrote:

Hi, I'm in the process of finding out if sd4 and the td4 take the same belt and how much hassle it is to change. Just list it on ebay I'm not sure how long it'll be till I find out from my mate

Hi guys, I'm still getting to grips with these freelander 2, so td and sd are identical parts for the timing belts. What else would I need? other than coolant (would it be pink oat like a td5?)

Bogart, did you list on ebay yet. Have you got a item number pls?

IMO You need to replace cambelt tensioner and cambelt idle pulleys, new crank bolt and waterpump as well as the cambelt.

You need a timing kit.
The thin long pin is to set the flywheel and the thicker pin for the camshaft (which turns half crank speed, so initially the crank maybe a whole turn out before the camshaft pin engages. Once both timing pins are in place the crank needs to be locked in place but using the locking device on the starter motor teeth ring. So the starter motor needs to come off. This allows a lot of torque to be applied to the crank bolt without bending the flywheel timing pin.

As the FEAD belt needs to come off to do the cambelt you should consider changing the FEAD belt and its idler and tensioner pulleys too.


I used https://www.smithandallan.com/product/smit...e-oat-4041 Jules

Sorry for late reply have been away.
Part numbers as follows

KP25633XS Cambelt waterpump kit

K106PK1745 Auxiliary belt kit

Did you list this on ebay or not got round to it yet?

No not ebay yet. Also note that Gates kits include a new crankshaft bolts and my offer has cam lockiong tool and torque wrench gauge needed to set uo correctly.