![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > Timing hole positions |
![]() ![]() |
|
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
Yes got it thanks
|
||
![]() |
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
Right so tried running with the MAP disconnected and no joy. Live data gives the rpm as about 210 spinning over so I guess the CKP is OK. Throttle position about 85% so I guess that is not stuck shut unless its a mistake due to broken teeth however it was in the open position when i removed it last
|
||
![]() |
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
So started stripping it again and decided to have a look at the throttle assembly. Turns out the gears are stripped which apparently is a common problem. The flap was in the open position so would this stop the engine from starting?
|
||
![]() |
|
BossBob Member Since: 30 Sep 2010 Location: Bristol Posts: 1330 ![]() ![]() ![]() |
No, if the flap is open the engine should start. If the flap is closed the engine is starved of air which helps stop a diesel runaway when an engine runs on its own oil. |
||
![]() |
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
Thats what i thought thanks
|
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
This post mentions over oil temp readings. Maybe start a new thread on Over Oil Temperature readings
|
||
![]() |
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
so carried on with the strip down. Managed to get the fuel filter off, starter motor and intake manifold before rain stopped play. Like an idiot I managed to break the intake manifold by missing one of the very hidden lower bolts. A few available on ebay I guess but still hacked off with myself.
|
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
I would purchase the later Inlet without the air flaps. Also there are two types of Glow Plugs 5 v for the later and 11v for the earlier VIN dependant |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
You can obtain a repair kit from ebay which replaces the plastic gear with a metal one. I bought one in anticipation of the gears stripping on mine at some time. Jules |
||
![]() |
|
Stace1g Member Since: 26 Feb 2024 Location: nottinghamshire Posts: 23 ![]() ![]() ![]() |
So took a break from the frellander as i have a lot else on following the death of my mum.
|
||
![]() |
|
little jimmy Member Since: 18 Jan 2024 Location: Hemel Hempstead Posts: 89 ![]() ![]() ![]() |
have you got any further along ? |
||
![]() |
|
little jimmy Member Since: 18 Jan 2024 Location: Hemel Hempstead Posts: 89 ![]() ![]() ![]() |
have you got any further along ? |
||
![]() |
|
Boxa Member Since: 01 Apr 2024 Location: Coventry Posts: 92 ![]() ![]() ![]() |
replace broken rockers and rebuild it chances are it'll be ok and replace TB as closed circuit won't let it start |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)