Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Maintenance & Modifications > Headlamp washer jets removal
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
superspeed3065



Member Since: 15 Jul 2020
Location: lanarkshire
Posts: 65
United Kingdom 2013 Freelander 2 SD4 XS Auto Firenze Red
Headlamp washer jets removal

The colour coded

headlamp washer jet holder on the passenger side of my 2013 freelander 2 needs to be removed because the water freely escapes from around the base of the washer jet holder. Do I need to remove the screws on the inner wheel arch and pull it back a little to get access , or remove the headlamp, or remove the bumper? which is the easiest way please?
Post #441342 3rd May 2024 1:56 pm
View user's profile Send private message View poster's gallery Reply with quote
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 170
England 2011 Freelander 2 SD4 HSE Auto Lago Grey

When I first got mine the pipe had become detached from the jet itself and I'm sure I got to it by taking the headlight out.

I may have removed the fog light as well...

It was a bit fiddly, the jet is held by a metal clip. Once it was out there was enough slack in the pipe to get it reconnected and it's been fine ever since.

I did get hold of a new jet before starting 'just in case' Rolling Eyes

The painted cover is just clipped onto the jet, I'm afraid I can't remember at which point I took it off, before or after unclipping the jet itself.

The metal clip is up against the underside of the top of the bumper.
Post #441343 3rd May 2024 3:17 pm
View user's profile Send private message View poster's gallery Reply with quote
superspeed3065



Member Since: 15 Jul 2020
Location: lanarkshire
Posts: 65
United Kingdom 2013 Freelander 2 SD4 XS Auto Firenze Red

Click image to enlarge

Thanks for your reply, I took the fog lamp out first ,strain of snapping the plastic when taking the cowl off but it came off then the fog lamp came out easily, Headlamp was threatening to snap brittle plastic so I loosened the wing off just to give a mil or maybe 2 . The jetter clip was on upside down compared to a video that I saw on line and when I finally got a screwdriver behind it and levered the dam thing pinged away to a secret hideout somewhere in the garage or within the depths of the engine bay that after an hour of searching still not found. No spare length of pipe so was difficult getting pipe off the jetter and now at the moment I can't get the jetter off the painted body. Ah well, not as bad as doing the ridiculously stupidly sited fuel filter. All in all the Freelander is a great car that should have still been made
Click image to enlarge

Post #441359 3rd May 2024 6:22 pm
View user's profile Send private message View poster's gallery Reply with quote
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 170
England 2011 Freelander 2 SD4 HSE Auto Lago Grey

Unfortunately, it's the one job I did without taking any pictures at the time and it was a while ago now, not long after I'd got theFL2 in late 2021...

Wish I could remember more to help you out...
Post #441360 3rd May 2024 6:46 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site