![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Help - Gear Selector cable |
![]() ![]() |
|
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 706 ![]() ![]() ![]() |
On fleabay possibly same as evoque
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2086 ![]() ![]() ![]() |
I can't see how replacing a cable is a 3 or 4 hour job.
|
||
![]() |
|
RichardM Member Since: 07 Jul 2015 Location: Cardiff Posts: 72 ![]() ![]() ![]() |
When mine went it was a long job and the mechanic said he never wanted to do it again.
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5165 ![]() ![]() ![]() |
what does the JLR manual say? Jules |
||
![]() |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 499 ![]() ![]() ![]() |
it might be worth looking on amazon at the universal repair kit ,im sure you could adapat some thing,or even make one yourself.the rac carry a horseshoe type clip that ive used on all sorts of linkages.ecp carry a kit but im not sure what its like,you could go there and look at one. |
||
![]() |
|
JJDukeSenior Member Since: 06 Dec 2023 Location: Bournemouth Posts: 2 ![]() ![]() |
Thanks, that part does appear to be the same. Great to have the option.
|
||
![]() |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 ![]() ![]() ![]() |
i have the same issue with mine, i have tried to make a clip with two M5 bolts but i found it a struggle to feed the clip through and then try to get the bolts in. So im back to a couple of cable ties atthe minute |
||
![]() |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 ![]() ![]() ![]() |
This is mine when i managed to get the fitting turned around to see what it was like inside
|
||||||
![]() |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 ![]() ![]() ![]() |
would this be an easier cheaper fix
|
||
![]() |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 ![]() ![]() ![]() |
I ordered that part and it seems to be the correct size only thing is I can't figure out how to get the old centre piece out to fit the new one. Anybody any idea how to get that centre piece out? |
||
![]() |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 91 ![]() ![]() ![]() |
anybody dismantled these gear linkages? |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)