Freel2.com - View topic - front diff,PTU,bearing noise? Also cambelt/haldex service


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > front diff,PTU,bearing noise? Also cambelt/haldex service

Page 2 of 2

Print this entire topic ·

pistol pete

Member Since: 28 Nov 2019
Location: Kent
Posts: 55

AHH cool
Thanks .

31st May 2023 3:38 pm

ransoman

Member Since: 07 Nov 2022
Location: Aberdeenshire
Posts: 57

2013 Freelander 2 TD4 GS Manual Santorini Black

pistol pete wrote:
Thank you everyone for the replies.
Just woken up as on nights.

Jacked up the landy, can't hear or feel any wheel bearings.
The is a little play in the CV but not loads.
I noticed I can move the shaft up and down in on the passenger side as it goes into the gear box. Not loads but defo movement.
There is also slack between turning one wheel and the other moving. Don't know how much normally but seems quite a lot.
.the other thing is I can rotate the front wheels while it's in park. Not sure if they are locked out / should be when In park.
Also when rotating wheel/taking up slack there is quite a bit of forward back movement on the engine .

I took a couple little terrible videos I'll upload
I phoned bells but they are on holiday for 2 weeks.

Is the "Cup" (the bit that goes into the gearbox) moving or is it the driveshaft going into the cup that is moving.

Yours sounds like mine but if I hold the cup steady and turn the passenger side wheel back and forth you can see and feel a few degrees of movement in the joint. The cup itself is not loose where it goes into the gearbox. If that was moving it would indicate the diff bearings have worn.

1st Jun 2023 12:03 pm

pistol pete

Member Since: 28 Nov 2019
Location: Kent
Posts: 55

Well. Looks like I've found the main culprit..what you think..

https://youtube.com/shorts/i9gsHV8XizQ?feature=share

1st Jun 2023 12:12 pm

robblue

Member Since: 10 Jan 2017
Location: cornwall
Posts: 269

2012 Freelander 2 SD4 XS Auto Santorini Black

yeah dont think there should be that much play in it 2009 FL2 S now gone
2011 FL2 HSE AUTO
2012 FL2 XS AUTO
2000 Kawasaki er 5

1st Jun 2023 12:17 pm

Aveling

Member Since: 24 Mar 2011
Location: Cardiff
Posts: 270

2014 Freelander 2 SD4 Metropolis LE Auto Firenze Red

I had exactly the same problem with my last Fl2, which was a 62 plate vehicle which had the noise appear from around 100,000 miles.
I did another 10,000 miles before finally changing it - by then it was about to blow I think.
Bell supplied the replacement, garage next door changed it for me.
Quiet car again.

1st Jun 2023 1:05 pm

pistol pete

Member Since: 28 Nov 2019
Location: Kent
Posts: 55

There's one up road from me for 200 quid that has 70k on it. Tempted by that for now.

1st Jun 2023 1:07 pm

ransoman

Member Since: 07 Nov 2022
Location: Aberdeenshire
Posts: 57

yeh that looks screwed...

you have a desirable spec. you could replace it and potentially make your money back?

Bear in mind a cheap one will be cheap for a reason. £200 sounds like a minefield unless you are buying it for parts.

1st Jun 2023 1:37 pm

pistol pete

Member Since: 28 Nov 2019
Location: Kent
Posts: 55

He is breaking the car due to a fire(fuel leak) wasn't too and just enough to write eit off
That's why I considered it..

1st Jun 2023 1:41 pm

ransoman

Member Since: 07 Nov 2022
Location: Aberdeenshire
Posts: 57

If the PTU is sound (and it is an Auto model), then go for it. you could weigh in what is left and only be out of pocket a few quid.

1st Jun 2023 2:44 pm

Page 2 of 2

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum