Jean-Claude Van Damme


.

Hercule Poirot
Kevin de Bruyne
Eden Hazard
Vincent Kompany
. . . that's it

Some pretty wonderful beers...……

getting back to the question, Powerful UK have posted a video on You Tube which shows how to access the system/hidden menu on a pre-facelift sat nav system. This may give you some help in resetting the default settings.

&t=532s

This maybe of help. MY13 HSE Lux Santorini Black Gone
MY11 HSE Santorini Black Gone
MY08 SE Blue, Gone
Alfa Romeo GT Gone
Alfa Romeo 156 Space wagon Gone
Volvo V40 Gone
Volvo 480ES Gone
VW Sirocco GTX Gone

Anyone know where the HDD unit is? This is different to the disc drive unit normally found under the drivers seat and I need to dissect it to see if I can get it working....
Many thanks

farmer chalk

The saga continues re the Belgium Sat Nav!
I have been in touch with my local LR garage and he has sent me a JLR document - LTB00642v3 - Navigation System Defaults To A Regional Location _ TOPIx
Trouble is i can't seem to load the link.
Anyway the upshot is that i have the permanent issue and the repairs to the sat nav would cost £1178+vat for remanufactured unit or £1882 + vat for new unit. UNBELIEVABLE!!!!

I think the Tom Tom is definitely the way to go.
Here is the document:

LTB00642V3
TECHNICAL BULLETIN
20 OCT 2015
© Jaguar Land Rover Limited
All rights reserved.
415-00
S E C T I O N :
Navigation System Defaults To A Regional Location
S U B J E C T / C O N C E R N :
All
M A R K E T S :
SITUATION:
A customer may express a concern that the navigation system reverts to a default location
for their region. There are 2 failure modes, either intermittent or permanent as described
below.
• Intermittent
1. After starting the vehicle, the voice notification "Welcome to the [country name]" is
played.
2. On entering the Navigation after start-up, the vehicle icon shows itself in the region
default, for example Belgium. Once GPS signal is acquired the vehicle icon jumps back to
the actual location and the voice notification "Welcome to the [country name]" is played.
3. All other features of the Navigation system work normally.
C O N D I T I O N S U M M A R Y:
21/02/2020 LTB00642v3 - Navigation System Defaults To A Regional Location | TOPIx
https://topix.jlrext.com/topix/content/doc...oupId=1612 2/5
• Permanent
This only exists in Integrated Audio Module (IAM) MCM-E level units. To find out what
hardware is fitted to the vehicle select the "Part Information" icon on the Vehicle
Statement Of Health (VSOH) on SDD.
1. After starting the vehicle, the voice notification "Welcome to the [country name]" is
played.
2. On entering the Navigation after start-up, the vehicle icon shows itself in the region
default, for example Belgium. Once GPS signal is acquired the vehicle icon jumps back to
the actual location and the voice notification "Welcome to the [country name]" is played.
In addition
After starting the vehicle:
-Previous Destination list is unavailable (all items are deleted, button is greyed out).
-In EU, Destination entry by Postcode is unavailable (button is greyed out) .
-Search area changes to region default, example Belgium.
-Current route is removed (deleted) in next ignition cycle.
This version has been created to update the Parts section.
CAUSE:
A software issue or hard fault with the IAM.
Suggested Customer Concern Code - A59.
NOTE:
You must carry out the instruction to download the latest software first, under no
circumstance must a module be ordered or replaced until it has been confirmed that
the software update has not resolved the issue and all of the symptoms for module
replacement are confirmed.
ACTION:
Should a customer express concern, follow the Diagnostic Procedure below.
Intermittent - Download new software to the IAM.
Permanent - Replace the IAM.
PA R T S :
21/02/2020 LTB00642v3 - Navigation System Defaults To A Regional Location | TOPIx
https://topix.jlrext.com/topix/content/doc...oupId=1612 3/5
NOTE:
Please refer to Microcat for any updates to these part numbers.
PART NUMBER DESCRIPTION QUANTITY
LR071116 Integrated Audio Module - ASIA 1
LR079509 Integrated Audio Module - EURO 1
LR079510 Integrated Audio Module - NAS 1
LR079512 Integrated Audio Module - ROW 1
LR065361 Integrated Audio Module - ROW2 1
T O O L S :
DVD143.03 AND CALIBRATION FILE 219 LOADED OR LATER
JLR approved diagnostic tool.
JLR approved battery support unit


21/02/2020 LTB00642v3 - Navigation System Defaults To A Regional Location | TOPIx
https://topix.jlrext.com/topix/content/doc...oupId=1612 4/5
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
DESCRIPTION SRO TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Configure existing module - Integrated
Audio Module
86.90.37 0.7 42 LR052071
Freelander 2/LR2 (LF) - Head unit - renew 86.50.81 0.4 42 LR052071
Range Rover Evoque (LV) - Head unit -
renew
86.50.81 0.4 42 LR052071
Discovery 4/LR4 (LA) - Head unit - renew 86.50.81 1.1 42 LR052071
Range Rover Sport (LS) - Head unit - renew 86.50.81 0.6 42 LR052071
Range Rover (LG) - Head unit - renew 86.50.81 0.5 42 LR052071
NOTE:
Normal Warranty procedures apply.
WA R R A N T Y:
NOTE:
The Integrated Audio Module (IAM) may be also referred to as the Audio Control
Module (ACM).
Intermittent Fault.
DI AGNOST IC PROCEDURE :
21/02/2020 LTB00642v3 - Navigation System Defaults To A Regional Location | TOPIx
https://topix.jlrext.com/topix/content/doc...oupId=1612 5/5
Permanent fault - IAM MCM-E units only
CAUTION:
This procedure requires DVD143.03 and Calibration File 219 loaded or later.
Connect the JLR approved battery support unit.
1.
Connect the JLR approved diagnostic tool to the vehicle and begin a new
diagnostic session, by reading the VIN for the current vehicle and initiating the
data collect sequence.
2.
Follow the prompts. 3.
Where no internet access is available. 4.
1. Select the Diagnosis Session Type.
2. Select the Symptoms tab and enter any of the following Symptom(s).
Electrical - Information and entertainment system - Navigation
system.
3. Select the Recommendations tab.
4. Configure existing module - Audio front control module.
When all tasks are complete, exit the current session by selecting the Session tab
and then selecting the Close Session option.
5.
Disconnect the JLR approved diagnostic tool and battery support unit. 6.
Replace the Integrated Audio Module (see TOPIx Workshop Manual, section 415-
00).

Let me know if anyone has solved this issue without spending this sort of money????

That’s excellent thank you! It’s also incredibly bad news...sounds like mine has a permanent fault and needs a replacement unit...

Anyone know anyone in SE England who repairs or replaces them?

That's not bad news, that's ridiculous......no fix and it never worked correctly from the get go? I'd do as suggested above and really tell JLR head office that this is unacceptable and likely will result in multiple lawsuits once you post your experience everywhere that let's you.

Someone made the unit for JLR, so the car manufacturer has a path to recourse.

It’s looking like my 2013 HSE has the same problem, the seems to think I’m somewhere in the Netherlands(?).
There is a red line through the “GPS” tag on the screen.
Has anyone managed to sort this problem out?

No we now use Waze on our iPhone… far more reliable!
The sat navs on JLR products really are shocking.. even my 2020 SVR is rubbish! On that I just CarPlay Waze!

Seems to be the way to go.
A bit poor by JLR though
In the interest of maintaining the car as it should be, could I not just fit a sat nav from another Freelander 2? EBay?

I stand to be corrected but i understand the complete module needs replacing and they are both age specific and coded to the car thus you would need someone to re-programme it… thus it was far easier to ignore that one and use our phones!
I tried to get hold of any company who could sell me a second hand one but failed miserably!

Sounds like a done deal

My factory sat nav on my freelander2 is rubbish, so I use an 8inch tablet with google maps mounted on magnets attached to sat nav screenand charged via the usb port, works great

That’s another option. Just think it’s bad for Landrover to have this on a relatively modern car and it turns out to be as useful as an ashtray on a motorbike.

I dont bother with the Sat Nav in my 2013 FL2 as its not easy to use and useless anyway. 35 yrs as a Truck driver I stick to good old maps less of a distraction and no silly female voices (apart from the the old boiler in the passenger seat !) 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Mahatma Gandhi said if there is an Idiot in power those who elected him are well represented