Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Haldex pump |
|
|
elvisman Member Since: 25 Oct 2021 Location: Cambridgeshire Posts: 43 |
Hi,
|
||
24th Sep 2022 7:37 pm |
|
elvisman Member Since: 25 Oct 2021 Location: Cambridgeshire Posts: 43 |
I think the pump is ok because when I connect 12v I can hear the pump working.
|
||
25th Sep 2022 8:15 am |
|
elvisman Member Since: 25 Oct 2021 Location: Cambridgeshire Posts: 43 |
Forgot to add no lights or warning messages on dash, and no faults on scanner tool |
||
25th Sep 2022 8:16 am |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 632 |
I am fairly sure the pump should run with the ignition on you should be able to hear it. 2013 FL2 XS.
|
||
25th Sep 2022 8:21 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
If there's no message on the dash saying the terrain response isn't working, then the Haldex is fine. No drive with no messages suggests the PTU splines have failed. Hyundai Ioniq 5 Ultimate. The family car. 2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||
25th Sep 2022 7:25 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5006 |
I took mine to Bell recently - re horrid noise up front, no 4WD - thought to be a PTU issue. No alarms showing.
|
||
26th Sep 2022 6:57 am |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 632 |
To check 4wd is operating jack one rear wheel off the ground chock front wheels start engine take hanbrake off try and turn the raised rear wheel if it does not turn 4wd is in and working .... if it does turn something is not working pump? Haldex? PTU? 2013 FL2 XS.
|
||
27th Sep 2022 3:49 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
You can't test the Haldex is working by lifting a rear wheel and turning it, as it's an on demand coupling. With the vehicle stationery, there's no demand for AWD, so no coupling between the front and rear should be taking place, which means the lifted rear wheel will just rotate when turned. Hyundai Ioniq 5 Ultimate. The family car.
|
||
27th Sep 2022 5:27 pm |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 632 |
Well I tried this a few days ago with the engine running lifted rear wheel is locked, engine off rotates freely, 4wd is activated when moving off then goes to 2wd unless loss of traction is detected on front wheels, so will be in when engine running. 2013 FL2 XS.
|
||
27th Sep 2022 5:53 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis