Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Haldex 3 - problem maybe wrong control unit |
|
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1358 |
You do not need to recode it if you are just cleaning the current unit. If you are replacing it however, it's a very likely possibility. Just do a search on site for JLR SDD v130 and Mongoose Cable. |
||
18th Feb 2022 10:10 pm |
|
kouba Member Since: 16 Apr 2020 Location: Sudoměřice Posts: 7 |
wondering what I could use to clean the unit and the connector? |
||
11th Mar 2022 10:03 pm |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 903 |
Are you talking about removing and cleaning the electronic control unit on the side of the Haldex. If so why. Is it faulty in some way. Now at the point when I learn something new something old is lost out the other side !
|
||
12th Mar 2022 1:22 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1358 |
At last resort:
|
||
12th Mar 2022 1:58 pm |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 903 |
You could just use electrical contact cleaner for the connector. As far as the inside of the unit, I have no idea. As it's a printed circuit board there is little you can do. I suppose spraying that with contact cleaner won't do it any harm. If you think it is faulty then you could just send it to that company for testing. Now at the point when I learn something new something old is lost out the other side !
|
||
13th Mar 2022 4:35 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis