I had an MOT today on my 14 plate SD4 auto XS which was fine but they did point out that one of my front fog lamps was smashed. I have had the front bumper off an FL2 a couple of years ago but I was wondering if anyone knows it you can replace the unit from the outside? Or better still can you just fit the glass?

 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Dead easy..pull/lever out plastic trim bezel. Undo three screws & remove damaged light.

Not possible to just replace the glass. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Yep dead easy as said above. I am actually looking at making a light guard for the fog lights.

Thanks guys  3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

beware some replacements have a plastic lens, which will discolour over time, make sure the replacement is glass before purchase.

what size jam jar do I need?  3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE