![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > AC Clutch Magnet Not Working. Removed Clutch Spacer Washers |
![]() ![]() |
|
|
ribama1 Member Since: 12 May 2021 Location: brisbane Posts: 73 ![]() ![]() |
Update: I just couldn't do it. I pulled the clutch assembly off the fl2 again and tested the clutch coil. It tested at 7ohms which should mean it is good. I know about 14.2 volts is coming along the cable so the coil should be working. The only thing left was the plug so I cut it off and put a new plug on. Problem solved. The pins on the plug were not making a good connection.
|
||
![]() |
|
Badger51 Member Since: 01 Mar 2014 Location: Korora Posts: 994 ![]() ![]() |
Glad to hear you sorted it without resorting to the bodge up |
||
![]() |
|
Andy131 Member Since: 10 Dec 2009 Location: Manchester Posts: 2187 ![]() ![]() |
The other down side to the bodge (I put a self tapping screw through the clutch on mine!) is that the refrigerant contains the lubricant. If you lose pressure the car cuts the clutch and the compressor doesn't seize.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
