Hi. I have a problem with my 2007 gs freelander 2. 2.2 150 bhp.i was driving along and then the truck just stopped. So I looked and found that there is no fuel getting to the pump. So that I would just replace the high pressure pump thinking it was the seal. So put the new one on and still the same. Took pump back off and I was looking at the end of the camshaft and I can not see how it drives it. I can turn the engine over and the pump will not turn. I think something is snapped off.

Possibly the end of the cam shaft has broken off that drives the HP pump.
Search "Exhaust camshaft breakdown"

Richard FL2 07 TD4 GS Auto
Ex 02 TD4 Auto

There was a problem with early camshafts breaking at the pump drive.

See here https://www.freel2.com/forum/topic10702.ht...shaft+pump Andy
Freelander2 HSE (59 Plate, MY10 spec)

What andyk159 said….2007 model known for it. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Hi previous owner of mine had that happen 07 reg garage didn't diagnos it correctly fitted new injectors new hp fuel pump then did the exhaust cam shaft cost him over £2000
Great you have spotted the fault good luck