Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > My FL2 started to rattle and then it just stopped altogether |
|
|
dondiddy Member Since: 16 Apr 2017 Location: Hamilton Posts: 753 |
Sounds like the engine has seized or the timing belt has broken. The starter cable has failed due to excessive current draw caused by the starter trying to turn over a seized engine. (it is designed to "blow" at the point it has) You would have to confirm/eliminate this by trying to turn the engine over by hand with a socket on the crankshaft or by removing the starter then trying to turn the flywheel with a screwdriver on the ring gear teeth. If you drop the oil out the car you might find metal fragments in the oil if something terminal has happened! Good luck! |
||
18th Nov 2021 12:02 pm |
|
Madon37s Member Since: 11 Mar 2021 Location: Shropshire Posts: 28 |
Hi,
|
||
18th Nov 2021 12:15 pm |
|
GlynnB Member Since: 20 Feb 2012 Location: South Yorkshire Posts: 127 |
Possible inlet flap gone into engine? Silver 2009 HSE |
||
18th Nov 2021 2:40 pm |
|
Madon37s Member Since: 11 Mar 2021 Location: Shropshire Posts: 28 |
Sorry, but I have no idea what that is.... Kind regards.
|
||
18th Nov 2021 4:10 pm |
|
Grimdog Member Since: 08 Sep 2020 Location: Wakefield Posts: 313 |
Lots of information on here, search swirl flaps. Good luck |
||
18th Nov 2021 5:11 pm |
|
Luke G Member Since: 26 Jan 2019 Location: Australia Posts: 87 |
The same thing happened when a lost nut got sucked into the engine on my car. I found the nut on top of one of the pistons when I took the head off. The fuseable link to the starter motor had also blown like yours has. I’m guessing that in your case something has been sucked into the motor and would back the swirl flaps theory suggested. |
||
18th Nov 2021 7:09 pm |
|
Madon37s Member Since: 11 Mar 2021 Location: Shropshire Posts: 28 |
Thanks for all the suggestions guys.
|
||
23rd Nov 2021 8:22 am |
|
Kage Member Since: 03 Oct 2018 Location: Midlands Posts: 236 |
Just curious. Which specialist have you gone to? |
||
23rd Nov 2021 1:25 pm |
|
Madon37s Member Since: 11 Mar 2021 Location: Shropshire Posts: 28 |
Salop 4 X 4
|
||
24th Nov 2021 11:33 am |
|
AJ918 Member Since: 26 Mar 2018 Location: North West Posts: 260 |
Sorry to hear that I am not sure what your being quoted, but if it was me my first step would be to remove the cylinder head and assertain exactly the extend of the internal damage before deciding the best course of action. It may just have bent the valves, or it may have damaged the pistons as well depends on the engine speed at the time of the failure, however, trying to start the vehicle after it stopped may have caused further damage. |
||
24th Nov 2021 12:45 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
It's not the end of the world.
|
||
24th Nov 2021 5:19 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis