Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Rear diff oil leak |
|
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Looks like there is a stud sticking out on the LH side- that's not correct.
|
||
20th May 2021 10:05 pm |
|
PhilBater Member Since: 18 Sep 2020 Location: Swansea Posts: 7 |
Not sure, only had it a 10 months - oil leak was on mot May 2019.
|
||
20th May 2021 10:46 pm |
|
Grue Member Since: 29 Apr 2018 Location: New Zealand Posts: 366 |
Not a biggy to keep topping it up i suppose, easy once you've done it the first time - depending on how much oil it's going through of course. |
||
20th May 2021 11:38 pm |
|
p_gill Member Since: 06 Dec 2011 Location: USA Posts: 1236 |
If I remember correctly the later differentials use studs and nuts in place of bolts. As for the oil 1. The differential has a breather, is a tube attache, is it plugged? 2. Are you sure that the differential wasn’t over filled |
||
21st May 2021 12:07 am |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 962 |
Whoever told you it is plate on plate is talking BS! There is an O ring seal there. A very simple fix really, more time consuming getting the diff out. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal. 171037Km as of 09/05/22 Superchips Bluefin Flash Nanocom Evo II (also sold) |
||
21st May 2021 12:11 am |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
What p_gill wrote |
||
21st May 2021 8:15 am |
|
itsaguything Member Since: 25 Apr 2019 Location: Ottawa Posts: 90 |
I’m guessing “someone” is not a mechanic. Let alone a mechanic that works on these.
|
||
21st May 2021 9:25 am |
|
merlinj79 Member Since: 13 Aug 2019 Location: San Diego Posts: 315 |
Yes, that's the later diff... wish mine had the studs, I'm on my second diff but it's the older model so I'm nervous it will also fail eventually. If you have to get your diff replaced, try to get the later model I think it's supposed to be improved and more durable. Anyone have experience with that? |
||
21st May 2021 3:04 pm |
|
itsaguything Member Since: 25 Apr 2019 Location: Ottawa Posts: 90 |
I have the original diff. 110000 kms. just had her 2nd fluid change. no issues to date. (touch wood).
|
||
22nd May 2021 10:02 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Much the same thoughts as on the other forum. Hyundai Ioniq 5 Ultimate. The family car. 2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||
22nd May 2021 10:26 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
I'm not sure that's accurate, as all diffs have 7 bolts. I've got a 2015 diff in mine, it has bolts, just like the early ones. The only difference between early and late is the size of the pinion tail bearing, which is 1.5mm wider after 2011.. Here's a picture of a 60k miles 2015 diff. You'll notice an oil tide mark, lots of residue from heated oil, oh and no studs in the case. Hyundai Ioniq 5 Ultimate. The family car. 2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||
22nd May 2021 10:43 am |
|
Jack frost Member Since: 21 Dec 2011 Location: UK Posts: 796 |
It’s a Land Rover they all leak oil |
||
22nd May 2021 12:54 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Is there a gasket or O-ring? Or is the diff sealed with just a layer of sealant ? I cannot see anything on here ... Jules |
||
22nd May 2021 4:03 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Stupid me. Should have looked to the JLR manual in the first place..
|
||
22nd May 2021 4:12 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis