Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Australia & New Zealand > New freelander owner in NZ! Which oil for the summer?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Freekiwi



Member Since: 04 Dec 2020
Location: Rangitikei
Posts: 6

New Zealand 2007 Freelander 2 i6 HSE Auto Tonga Green
New freelander owner in NZ! Which oil for the summer?

Hi, I've just purchased a 2007 3.2l petrol.

I know the recommended spec is 0w-30 for oil, but that seems to be a cold weather viscosity. Do you guys still use that weight over summer, or go with the easier to find 5w-30 or 5w-40?

Cheers!

Also, heard the haldex is touchy. My car has done 80 thou kms. worth replacing fluids now, and where do you get the stuiff?

Post #400711 4th Dec 2020 10:19 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1248

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Most of FREEL2 are diesel owners.

I own two 3.2s (same engine in both)

2008 LR2 3.2
2010 S80 3.2

It's warm where I live (typically it doesn't get below 0 C)

Use a quality full synthetic motor oil.

0w30 - sure
5w30 - absolutely
5W40 - no problem

I am running 5W30 right now.

Good luck

Paul

Post #400713 5th Dec 2020 12:37 am
View user's profile Send private message View poster's gallery Reply with quote
Freekiwi



Member Since: 04 Dec 2020
Location: Rangitikei
Posts: 6

New Zealand 2007 Freelander 2 i6 HSE Auto Tonga Green

Legend. Thanks Paul. Most of the freelander 2's here in New Zealand are the 3.2L i6. Mostly Jap imports. Diesels are much more rare.

Post #400714 5th Dec 2020 12:54 am
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4907

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

The specification is on page 162 of the car's Owner's Handbook, but I have a more recent 2.0L turbo. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #400715 5th Dec 2020 4:10 am
View user's profile Send private message View poster's gallery Reply with quote
Freekiwi



Member Since: 04 Dec 2020
Location: Rangitikei
Posts: 6

New Zealand 2007 Freelander 2 i6 HSE Auto Tonga Green

Lightwater wrote:
The specification is on page 162 of the car's Owner's Handbook, but I have a more recent 2.0L turbo.


Handbook states
"Use only 0W-30 engine
oil, meeting ACEA A5/B5
specification.
"

But I couldn't see a reason not to go up a winter weight to 5w

Post #400716 5th Dec 2020 4:17 am
View user's profile Send private message View poster's gallery Reply with quote
Grue



Member Since: 29 Apr 2018
Location: New Zealand
Posts: 371

New Zealand 2007 Freelander 2 TD4 SE Auto Sumatra Black

Was very pleased with international shipping from these guys for Haldfex filter and oil

Haldex Oil: https://www.haldexparts.com/31367940-volvo-oil-for-awd.html
Gen3 Heldex Filter: https://www.haldexparts.com/30787687-oil-filter-for-volvo.html
You may or may not want to get a haldex O Ring LR002888... mine was fine and they didn't need a replacement, so got one here if you need it.
Lot of places in NZ won't even know what a haldex is. I found an place that focuses on European cars and they'd done them before in volvos and landrovers.


Sounds like you're still on low mileage compared to most, so I'd be slowly be ticking off preventative maintenance over next few services. Haldex, Rear Diff oil, Gearbox Oil, PTU oil, coolant...

Post #400734 5th Dec 2020 6:31 pm
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494

Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Not sure I'd go to the xW-40 though, I seem to recall from another vehicle that the summer viscosity being so low is because oil gallerys are much finer than in the old days when we ran any old oil up to 50 or 60 weight.

The fine passages increase the pressure, I believe.

Not cold, p-gill? It's all relative I guess. 15 C is a freezing day here in Sydney!

Cheers guys. MY11 SD4 SE Auto

Post #400756 6th Dec 2020 5:29 am
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1358

Canada 2008 LR2 i6 SE Auto Tambora Flame

5W30 here is Ontario, Canada everyday. Amsoil Signature or XL........... Very Happy

Post #400781 6th Dec 2020 12:25 pm
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

ozjeff62 wrote:
...the summer viscosity being so low is because oil gallerys are much finer than in the old days...


Don't imagine the oil passages like medical needles... Very Happy
Didn't saw up until now passages with smaller diameter than 3 mm, not even on the camshaft area towards the hydraulic lifters.
And through 3mm and up will flow any oil even when cold.

Post #400790 6th Dec 2020 2:30 pm
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494

Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Well, you don't get advice much better than from Alex! I doffs me lid. MY11 SD4 SE Auto

Post #400826 7th Dec 2020 11:21 am
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1248

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

This is a good discussion.

Alex thanks for pointing out that we are being overly cautious.

I have used 0W40 and 0W30 in my LR2 since new.

For over 125,000 miles (201,000 KMs)

Lets talk about the viscosity at 100 C (for the specific oils I use)

0W30 - 12.1

0W40 - 13.5


That means that the 0W40 is about 11% thicker at engine operating temperature.


For 30 wt oil the viscosity range is 9.3 --> 12.5

For 40 wt oil the viscosity range is 12.5 --> 16.3


Someone decided that we should have 0, 10, 20, 30, 40, 50, 60

If instead they had picked 5, 15, 25, 35, 45, 55, 65 then both of the oils that I have used would be 35 wt.

They really are not that different even though one says 30 on the bottle and one says 40.

The 40 wt should be 33% thicker than the 30 wt but for the oils I've used its 11%

Or if you prefer to think about it this way

Use a thin 40 wt or a thick 30 wt and you will be fine.

Take care

Paul

Post #400858 7th Dec 2020 8:05 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1248

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

I just checked my owners manual for a 2008 LR2

US Spec. 3.2

And it wants 5W30




For reference I ignored this specification since new and I’ve only used 0W30 and 0W40

But most USA LR2 owners have been running the 5W30 as provided by the Land Rover dealers service department

Thanks

Paul

Post #401031 13th Dec 2020 12:35 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site