Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Technical > Freelander i6 won’t start
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Reme242



Member Since: 21 Nov 2020
Location: Rissington
Posts: 7
2008 Freelander 2 i6 HSE Auto Tonga Green
Freelander i6 won’t start

Hi everybody.
Maybe someone here has had this or knows where to start.
Car just refuses to start. Has lots of very quiet relay ‘clicking’ sounds when the key is put in and taken out. Christmas tree lights on the dash,cd loads and unloads,etc etc. Normally I would immediately think battery but it is in perfect charge and no corroded terminals or fuses. Anybody got an idea? Please?
Post #400230 21st Nov 2020 2:43 pm
View user's profile Send private message View poster's gallery Reply with quote
Grimdog



Member Since: 08 Sep 2020
Location: Wakefield
Posts: 315
United Kingdom 2010 Freelander 2 TD4_e HSE Manual Barolo Black

The ignition terminal virtually fell of my starter motor when I was removing it whilst changing the cam belt the other day. As good a place as any to investigate. Starter terminals at in an exposed position at the front of the engine and mounted on top of the starter. A little difficult for us humans to access, but not the elements. Good luck
Post #400231 21st Nov 2020 3:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Reme242



Member Since: 21 Nov 2020
Location: Rissington
Posts: 7
2008 Freelander 2 i6 HSE Auto Tonga Green

Hi. Just to clarify. This particular Freelander is the model with the straight 6 petrol engine. Quite rare so will prob be difficult to get info on it.. is there a ‘rave’ cd for the freelander2?
Post #400233 21st Nov 2020 4:17 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241
United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Reme,

Try starting in Neutral instead of Park (Make sure you are on level ground)

This link explains the procedure

https://landroverforums.com/forum/lr2-35/2...es-102912/

Good luck

Paul
Post #400234 21st Nov 2020 4:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Grimdog



Member Since: 08 Sep 2020
Location: Wakefield
Posts: 315
United Kingdom 2010 Freelander 2 TD4_e HSE Manual Barolo Black

Sorry, missed the fact yours is a petrol.....durr
Post #400236 21st Nov 2020 4:43 pm
View user's profile Send private message View poster's gallery Reply with quote
Reme242



Member Since: 21 Nov 2020
Location: Rissington
Posts: 7
2008 Freelander 2 i6 HSE Auto Tonga Green

Hi all. Basically,There is an abnormal ‘movement’ of relays as soon as the key is put in the slot. ‘Things’ switch themselves on and off and the cd does not work.Radio does work. It really is as if the battery were nearly dead but at 12.7 volts,that cannot be the case. Somewhere there will be a bad connection of some sort but where?? Corroded earth perhaps? But where? Maybe someone out there has had similar?
Post #400237 21st Nov 2020 5:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Luke G



Member Since: 26 Jan 2019
Location: Australia
Posts: 88
2010 Freelander 2 TD4 HSE Auto Narvik Black

On the top of the positive battery terminal lead on the diesel motor and I’m assuming on the petrol as well is a fuseable link. It’s hidden under a small grey plastic cover which you have to break off to check and if it has blown the motor won’t kick over but the ignition will come and try to power everything up. I desperately had to get my car for its registration check when mine went so I soldered a very temporary paper clip in place (see photo)

so at least I could start the thing (not advisable). It may not be it but I would check it before moving on to all the other fuses.
Post #400238 21st Nov 2020 7:05 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241
United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Do a hard reset before searching for a bad connection

Hard Reset = remove battery leads and touch them together to get the voltage to drop to Zero

Good luck


Paul
Post #400240 21st Nov 2020 7:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Reme242



Member Since: 21 Nov 2020
Location: Rissington
Posts: 7
2008 Freelander 2 i6 HSE Auto Tonga Green

I am beginning to think that the fin famous steering colony lock is at fault. Anyone know how to dump the lock?
Post #400244 22nd Nov 2020 6:54 am
View user's profile Send private message View poster's gallery Reply with quote
Reme242



Member Since: 21 Nov 2020
Location: Rissington
Posts: 7
2008 Freelander 2 i6 HSE Auto Tonga Green

Auto correct is a pain.
I am now thinking that the steering column lock is at fault. Anyone know how to ‘dump’ the lock?
Post #400245 22nd Nov 2020 7:32 am
View user's profile Send private message View poster's gallery Reply with quote
mike e



Member Since: 18 Jan 2011
Location: WALES
Posts: 81
Wales 2014 Freelander 2 SD4 HSE Auto Santorini Black

check other posts on steering lock topic...someone has plugged in an adapter to solve the problem 2007 hse gone
214xs

Last edited by mike e on 22nd Nov 2020 11:46 am. Edited 1 time in total
Post #400255 22nd Nov 2020 11:45 am
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1358
Canada 2008 LR2 i6 SE Auto Tambora Flame

https://www.freel2.com/forum/topic36130.html
Post #400256 22nd Nov 2020 11:46 am
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241
United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Reme242 wrote:
Auto correct is a pain.
I am now thinking that the steering column lock is at fault. Anyone know how to ‘dump’ the lock?


First verify that the lock is the issue

Verify that you can enter power mode II and attempt to start in Neutral instead of Park

Follow these instructions exactly
0. Engauge the emergency brake, is the LR2 parked on level ground if yes then proceed
1. Dock the key (Don't touch the Brake)
2. Press and hold the start button for 2 seconds (Don't touch the brake)
3. Press the Brake and move from Park to Neutral
4. While pressing the brake also press the start button (Does the engine start in Neutral?)
5. Shift back to park
6. Confirm that the Steering Colum lock has released (Can you turn the steering wheel, it will be stiff without power assist but it shouldn't be locked)
7. Did the steering column lock release?
8. With the transmission in park if everything is powered off then you should be able to undock the key
9. Note: you may need to press the start/stop button with your foot off the brake to get everything to shut down

Report back with your findings and further instructions will be provided
Post #400277 22nd Nov 2020 6:49 pm
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2597
2007 Freelander 2 TD4 HSE Auto Stornoway Grey

I’ve never heard of this power mode 11.
Post #400284 22nd Nov 2020 10:19 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241
United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Click image to enlarge

Post #400285 22nd Nov 2020 10:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site