Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > 2013 Freelander 2 rear diff +drive shafts |
|
|
riverblanche Member Since: 11 Apr 2019 Location: Retford'ish Posts: 438 |
Hi,
|
||
23rd Oct 2020 4:56 pm |
|
tenet Member Since: 23 Jul 2009 Location: cotswolds Posts: 1081 |
Rear diffbearing failed on my 64 plate sd4 at c30,000mls in 2018 - fixed under warranty. LR fitted an updated bearing on post 2013 models but still continued to use inferior Indian manufactured items on some builds and it those which I believe cause premature failure. MY 09 GS manual in Lago Grey, Wood Co arm rest and side bumper strips - now sold.
|
||
23rd Oct 2020 6:52 pm |
|
Safeman23 Member Since: 21 Jun 2015 Location: Isle of Skye Posts: 14 |
Thanks for your replies. The vehicle has done 67K Haldex has been stripped and flushed with new fluid and service kit. It was in a bit of a state Diff has been flushed and refilled. There is a very slight rumble from the rear off side wheel bearing (difficult to tell) will do both with SKF hubs or LR parts. If its still there after dong the bearings then drive shafts. I cant detect any play in in the CV joints or the tripod. So moving on the diff must be suspect.
|
||
24th Oct 2020 5:44 am |
|
Jack frost Member Since: 21 Dec 2011 Location: UK Posts: 796 |
Make sure you rule out worn rear tyres first. |
||
24th Oct 2020 4:02 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4987 |
@Jack - Yes very good point - worn tyres can make hell of a rumble on these cars - often mistaken for worn hub/diff Jules |
||
24th Oct 2020 8:15 pm |
|
Safeman23 Member Since: 21 Jun 2015 Location: Isle of Skye Posts: 14 |
Thanks for that. Yep I have discounted that, new tyres all round. The old ones were near the legal limit. Going to put the vehicle
|
||
25th Oct 2020 10:37 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis