Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > car runs great then judders now and again quite severely |
|
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2594 |
I’m no expert but I keep reading an original fuel filter sorts a lot of things out. |
||
17th Sep 2020 8:01 am |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
possible, it was last changed July 2017 . . . .only 8000 miles back ! 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
17th Sep 2020 8:06 am |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 962 |
As a new CPS is relatively inexpensive & easy to change, I would change that first & go from there.
|
||
17th Sep 2020 8:27 am |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 |
I get the judder when it's hot outside. Car is currently getting serviced so have asked that a genuine LR fuel filter is fitted. Probably not going to be warm enough for another 6 or 7 months to test the theory but it'll be there waiting 😂 FL2 TD4 GS 60 reg Facelift - so many issues
|
||
17th Sep 2020 8:59 am |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
just completed a 30 mile test run, car runs perfectly up to 10 miles and engine at correct temp, then one sudden jolt, got another 15 miles down the road and 2 further jolts.
|
||
17th Sep 2020 9:33 am |
|
Dave47 Member Since: 31 Aug 2014 Location: Margate Kent Posts: 1333 |
Inlet flap broke!
|
||
17th Sep 2020 10:02 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5020 |
Can you scan the OBD for fault codes ? I'd put crankshaft sensor fairly high on the list - its relatively cheap and easy to replace too. Jules |
||
17th Sep 2020 11:12 am |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
got a scanner which I used on previous car, it appears to work on freelander, and it shows no errors 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
17th Sep 2020 11:15 am |
|
Denboy Member Since: 24 Oct 2019 Location: Merseyside Posts: 56 |
Faulty crank sensor doesn't normally show a code |
||
17th Sep 2020 1:58 pm |
|
Delboy Member Since: 31 Aug 2017 Location: Norwich Posts: 108 |
I had the same kind of shudder on my 09 TD4. Turned out to be a faulty torque converter. Derek Hill
|
||
17th Sep 2020 8:26 pm |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
mine is a manual gearbox 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
18th Sep 2020 5:58 am |
|
Luke G Member Since: 26 Jan 2019 Location: Australia Posts: 87 |
I had a similar problem and it turned out to be an air leak in the fuel line running from the fuel filter to the high pressure pump. Trying wiggling it around the fuel filter end with the engine running, I saw a line of air bubbles appear (part of the hose is clear) and then the engine ran rough. I suspect the o rings wear over time from the changing of the filter. I replaced the line (it’s got a fuel temp sensor on it) and I haven’t had a problem since. |
||
18th Sep 2020 7:29 pm |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
just an update on this, the original problem cleared itself up, so I assume old fuel or lack of use was making for a spluttering performance, which seemed a logical idea to begin with . . . . 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
8th Nov 2020 3:24 pm |
|
Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784 |
yes indeed the problem cleared itself back in November, then yesterday it re-appeared, if I take a stab at it being the crankshaft sensor, is it one of those parts that should most definitely be the land rover part, or is there a respectable cheaper one that will be just as good ?? 2017 SEAT Ateca 4drive 2.0 xcellence (May 2022 -
|
||
14th Aug 2021 9:07 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis