Have activated “Tow Assist” and for those who want to know what this is I have attached a Land Rover tutorial.




















 MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Recently having a need for “Timed Climate” as it’s the first summer with new “4 legged friend” and on the odd occasion the need arises to leave him in the vehicle briefly while calling into the shops etc and this is generally in an underground car park, so thought I’d post video of how system allows you to have climate on whilst vehicle is off. There’s usually enough residual cooling from the evaporator to keep the inside temp quite comfortable considering outside ambient temperatures here.
Flashing “A/C” led indicates cooling whilst flashing “AUTO” led indicates heating. As I don’t have a Webasto connected only cooling is available as the “manual heat” soft button activated but shortly turns off as the system senses no Webasto to heat.
Single event and reoccurring timers can be preset for future activation events.

[/img]

 MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Hi Stuart,
Do you have any post about powered tail gate?
Sorry to post here

A very quick search, in box above of "Powered Tailgate" found this .....

http://www.freel2.com/forum/topic32714.htm...d+tailgate

always best to search first.

.

As a forward note I’d like to say that it’s thanks to Vanny’s tinkerings on his bench system that I was able to activate Ambient Configurable lighting. I’d previously assumed the FCDIM didn’t have the software as I’d been unable to discover the field/fields to activate this feature.





As Vanny and I have quite different approaches it makes for a good combination of bench and real life testing

At this stage it’s not completely working. I’m able to turn off and on but that’s it currently and when turned on it turns itself off after a short period. We understand why but not necessarily the solution so still work to be done.
Some explainations are that I still don’t have the correct combination of CCF fields activated or this version of the Ambient Configurable lighting, Tri-Colour is not supported. If so the search continues for the other option which is Bi-Colour or 5 choices of Configurable lighting v 10 pictured below.

Click image to enlarge

Wow! Amazing research work you've done here, guys. Know exactly what a huge amount of time this consumes, you just can't be thanked enough!

Could anyone please share necessary CCF opts for activating 4x4i, rear cam soft button for switching between PDC overlay/cam feed, and opts to enable PDC overlay after R->D switch. The latter really freaks me out, that's ridiculous to have to cycle PDC each time to get PDC overlay screen after reversing, what JLR were thinking about?)

Not an FL2 owner, but Evoque 2013 instead. Have IAM2.1 L3 (retrofitted) and rear cam and front/rear PDC (factory). I have latest SDD with FW updates access & engineering mode passwords.

dmitry, have you checked out http://lr-club.com/ ?

That's where I got a lot of my original information from.

Yes, I already know that board, got lots of my initial knowledge from there. This Evoque is my first LR.

However I don't recall seeing anything specific regarding hidden features / useful CCF options in FL2 or Evoque forums, and I read a lot of them some time ago. May be I've just missed that info, will give it another try.

Tried some quick searches - so far to no avail.

*sorry for cluttering this thread - have no access to PM atm

Hi

I’ve just fitted heated seats in my MY07. All the wiring was already in place. Changed out the controls. Been into SDD and told it I have heated seats fitted so now the controls turn on but the seats are not heating. I’ve read on here that three fields in the CCF need changing have I missed one?

Stuartc wrote:

As I said previously, the Air Quality Sensor is a part of the air mix actuators link harness. You can buy the link harness as a separate part. I suggest you get the wiring schematic of the HVAC system and it will become all clear. I ended up not changing the whole harness as it was difficult to gain access to the drivers side air mix actuators so I just removed the single Green wire and pin from the new harness and put it into my existing harness and then extended the 3 wires (Green/red/blue) to the air quality sensors location.
New harness with extra LIN wire for Air Quality Sensor.



Add Green LIN wire with pin to existing LIN Harness/plug.








All is working 100%, Infact it's very affective and I've not once manually switched to recycle since installing. It's quite obvious in its functioning. Just as your nose detects any vehicle fumes, it extinguishes. It's only noticeable in the time it takes for the actuator to switch to recycle.
Before installing Air Quality Sensor...

Click image to enlarge

After installation...

Cambo wrote:

There is a LOT of work going on in the background here...

OK so after this weeks "investigations" we are ready to try the following;

DVD video picture showing on the move
Navigation entry via touchscreen, on the move.
Playing .avi video from a USB stick, on the move.

Cambo hasn't regularly posted here for over two years, he's unlikely to respond.

I suspect he doesn't post as he has a very busy business upgrading Land Rover infotainment systems, you might be better contacting him directly through;


http://www.oldjaguar.com/

Hi all,
I have just purchased a 2013 FL2 HSE (With updated screen) and would love Some of these functions. How do I go about it?
Thanks in advance.

There are a lot of posts on the forum and an index of interesting retrofits.

it might be worth reading through those and asking questions when you're stuck on a specific element.

Ultimately you'll need to make CCF changes and or hardware changes.

When I say updated screen i mean the 2.1 as standard in the >2013?